
You paste a web address and it stays plain black text. Or you click a blue link and nothing opens. When microsoft word hyperlinks not working is the problem, the links in your document are either not real links yet, or something is stopping Word from following them.
Links fail for small reasons: a switched-off AutoCorrect option, a missing press of Enter, a typo in the address, or a document that is protected. This guide starts with the one-minute fixes and works up to a repair, so your links open again with a single click.
Table of Contents
- Why This Error Happens
- Quick Checks
- Diagnosing the Problem
- Fix 1: Turn On Automatic Hyperlinks
- Fix 2: Press Enter or Space After the Address
- Fix 3: Use Ctrl+Click to Follow a Link
- Fix 4: Repair the Link with Edit Hyperlink
- Fix 5: Remove the Link and Add It Again
- Fix 6: Check the Address for Typos
- Fix 7: Check Protected View and Trust Settings
- Fix 8: Check the Document Is Not Protected
- Fix 9: Update and Repair Office
- Fix 10: Check Your Default Browser Is Set Correctly
- Fix 11: Check and Clear the Hyperlink Base
- What to Avoid
- Frequently Asked Questions
- Conclusion
Why This Error Happens
1. Automatic Hyperlinks Are Switched Off
Word turns web addresses into clickable links as you type, but only when the AutoFormat setting for it is on. If someone switched it off, pasted addresses stay as plain text forever. The link looks dead because it was never created. This is the most common cause, and the fix is a single checkbox.
2. The Address Was Never Activated
Word only converts an address into a link when you press Enter or Space after typing it. If you paste an address and then click elsewhere without pressing either key, Word leaves it as plain text. The address looks like a link to you, but Word never finished creating it.
3. Links Need Ctrl+Click by Default
In Word, a single click on a link only places the cursor in it. You must hold Ctrl and click to follow it. Many people do not know this, so they click once, nothing happens, and they conclude the link is broken. The link is fine. The click is wrong.
4. The Link Address Has a Typo or a Bad Character
A link with a missing letter, an extra space, or a # character in a file name will not open. Word may still show it in blue, because the blue colour only means a link exists, not that its address is correct. File names with special characters are a common trap when linking to files on your computer.
5. Protected View Is Blocking the Link
Documents from the internet or email open in Protected View. In that mode, Word blocks links from opening, because a link in an untrusted file could lead to a harmful site. The links look normal, but Word refuses to follow them until you enable editing.
6. Field Codes Are Showing Instead of Links
Word stores links as field codes behind the scenes. If field codes are switched on, you see grey code such as { HYPERLINK “https://example.com” } instead of clickable blue text. The link still exists, but it is not clickable in that view. One keyboard shortcut switches the display back.
Quick Checks
Run these checks before you change any settings. They take about a minute.
- Hold Ctrl and click a link. If it opens, the links were never broken.
- Press Alt+F9. If the links turn into grey code or back again, field codes were the issue.
- Type a web address in a new blank document and press Space. If it turns blue and underlined, automatic links work.
- Look for a yellow bar at the top of the document. If it says Protected View, click Enable Editing.
- Hover over a link and read the tooltip. It shows the address Word will open, so you can spot a typo.
- Try the same link in a different document. If it works there, the problem is in this document, not Word.
Diagnosing the Problem
| Symptom | Cause | Go to Fix |
|---|---|---|
| Pasted addresses stay plain text | Automatic hyperlinks are off | Fix 1 |
| Address turns blue only after Enter | Never activated with Enter or Space | Fix 2 |
| Single click does nothing | Ctrl+Click is required | Fix 3 |
| Link opens the wrong page | Wrong or mistyped address | Fix 4, Fix 6 |
| Links show as grey code | Field codes are showing | Fix 5 |
| Links blocked in downloaded files | Protected View | Fix 7 |
| Links fail in one document only | Document protection | Fix 8 |
| Links fail in every document | Damaged Office install | Fix 9 |
Fix 1: Turn On Automatic Hyperlinks
This is the setting that turns typed addresses into links. When it is off, microsoft word hyperlinks not working is the natural result, because Word never creates the links in the first place. Turn it on and new addresses will link themselves.

- In Word, go to File > Options > Proofing.
- Click AutoCorrect Options.
- Click the AutoFormat As You Type tab.
- Tick Internet and network paths with hyperlinks.
- Click OK twice, then type a web address and press Space to test it.
Note that this fix only affects addresses you type or paste after the change. Links that are already plain text will not turn blue on their own. For those, use Fix 2 or Fix 5. Microsoft’s own guide to create or edit a hyperlink confirms that Word converts an address automatically when you press Enter or Space, provided this setting is on.
Fix 2: Press Enter or Space After the Address
Word waits for a signal before it converts an address. That signal is Enter or Space. If you paste an address and then click somewhere else, Word never gets the signal, and the address stays plain text.
- Click at the end of the plain-text address.
- Press Space, then press Backspace to remove the extra space if you do not want it.
- The address should turn blue and underlined at once.
- If it does not, check Fix 1 first, because the automatic setting may be off.
- Repeat for each plain address in the document.
This trick also works for email addresses. Type an email address, press Space, and Word turns it into a mailto link. If you paste many addresses at once, the fastest method is to fix the setting in Fix 1, then re-paste them. Pasting with Ctrl+Shift+V as unformatted text will not create links either, so use a normal paste with Ctrl+V when you want links.
Fix 3: Use Ctrl+Click to Follow a Link
Many people report broken links that are not broken at all. In Word, a plain click only puts the cursor inside the link text so you can edit it. To open the link, you must hold Ctrl and click. Word shows a tooltip to remind you, but it is easy to miss.
- Hover over the link and read the tooltip. It should say Ctrl+Click to follow link.
- Hold Ctrl and click the link once.
- The web page or file should open in your browser or app.
- If you prefer single clicks, go to File > Options > Advanced.
- Under Editing options, untick Use CTRL + Click to follow hyperlink, then click OK.
Changing the setting in step 5 makes links open with a single click, but it also makes them harder to edit, because every click opens the link instead of placing the cursor. Most people are happier leaving Ctrl+Click on once they know about it. If links still do nothing even with Ctrl+Click, the address itself is the problem, so move on to Fix 4.
Fix 4: Repair the Link with Edit Hyperlink
A link can look perfect and still point to the wrong place. The address may have a typo, an old page, or a missing part. The Edit Hyperlink dialog shows you the real address and lets you correct it.

- Right-click the link and choose Edit Hyperlink, or press Ctrl+K with the cursor in the link.
- Look at the Address box at the bottom of the dialog.
- Correct any typo in the address.
- Check that the address starts with https:// for web pages.
- Click OK, then Ctrl+Click the link to test it.
While the dialog is open, you can also change the Text to display box. That is the blue text you see in the document. It can say anything, so a link can display friendly text such as “our website” while pointing to a long address. If the displayed text and the address do not match, trust the address box. If you use Find and Replace often, our find and replace guide may help, since broken links are often found the same way broken text is.
Fix 5: Remove the Link and Add It Again
If a link is showing field codes, or if it was created in a damaged way, the cleanest fix is to start over. Remove the link completely, then create a fresh one. This takes less than a minute per link.
- Right-click the link and choose Remove Hyperlink.
- The text stays, but the blue colour and underline disappear.
- Select the text again.
- Press Ctrl+K to open the Insert Hyperlink dialog.
- Type or paste the correct address in the Address box and click OK.
Before you remove the link, press Alt+F9 once. If the link text turns into grey code, field codes were showing, and pressing Alt+F9 again may have fixed the display without any removal. If the code stays, remove and re-add the link as above. This fix also helps when a link was pasted from a web page with hidden formatting that Word cannot follow.
Fix 6: Check the Address for Typos
A link fails silently when its address is wrong. Word does not check whether the address works, so a single wrong letter sends you to an error page or nowhere at all. Check the address carefully, character by character.

- Hover over the link and read the address in the tooltip.
- Look for missing letters, extra spaces, or a wrong domain ending such as .co instead of .com.
- Right-click the link, choose Edit Hyperlink, and correct the address.
- Avoid the # character in file names you link to. Word does not accept it in hyperlink addresses.
- Rename any linked file that has a # in its name, then edit the link to point to the new name.
Also check for spaces inside the address. A space breaks a web address into two pieces, and Word links only the first piece. If the address came from a PDF or a scanned document, retype it by hand rather than trusting the paste. If the linked file has moved to another folder, the link breaks too, so keep linked files in a stable location.
Fix 7: Check Protected View and Trust Settings
Documents from email, downloads, or the internet open in Protected View. Word blocks their links until you trust the file. This is a safety feature, not a fault, but it looks exactly like broken links.
- Look for the yellow bar at the top of the document.
- If it says Protected View, click Enable Editing.
- Try the link again with Ctrl+Click.
- If links still will not open, go to File > Options > Trust Center > Trust Center Settings.
- Check the settings under Protected View and File Block Settings for anything unusual.
Only enable editing for files you trust. If the file came from an unknown sender, do not click its links at all. If every downloaded document opens in Protected View and you are tired of clicking, you can relax the settings for files from trusted locations, but leave the protection on for everything else. Microsoft explains these protections in its guide to links in Word for the web, which notes that links behave the same in desktop Word and Word for the web once a file is trusted.
Fix 8: Check the Document Is Not Protected
A protected or read-only document can block link editing and sometimes link clicking. If you cannot edit the link, or Word ignores your clicks, protection is a likely cause.

- Look at the title bar. If it says Read-Only, the file is locked at the file level.
- Go to Review > Restrict Editing and check whether editing is restricted.
- If a password is needed, ask the person who protected the document.
- Go to File > Save As and save a copy under a new name.
- Open the copy and test the links there.
If the document is marked as Final, go to File > Info > Protect Document and click Mark as Final again to turn it off. Our guide to Microsoft Word document read only mode explains the read-only side in detail, and our track changes guide covers documents that behave oddly under review restrictions.
Fix 9: Update and Repair Office
If hyperlinks fail in every document, including a new blank one, Word itself is the problem. Update Office first, because a patch may fix it, then repair if the update does not help.
- In Word, go to File > Account > Update Options > Update Now.
- Restart Word after the update and test a link.
- If links still fail, close all Office apps.
- Right-click the Start button, choose Installed apps, and find Microsoft 365 or Microsoft Office.
- Click the three dots, choose Modify, pick Quick Repair, and click Repair.
Quick Repair works offline. If it does not help, repeat with Online Repair, which downloads fresh files. After the repair, open Word, type a web address, press Space, and check that it turns into a link. If tables in your document also misbehave after a repair, our guide to Microsoft Word table formatting problems covers that side of Word formatting.
Fix 10: Check Your Default Browser Is Set Correctly
When you Ctrl+Click a link, Word does not open the page itself. It hands the address to your default web browser, so if no default browser is set, or the browser association is broken, the click does nothing and Word shows no useful error. The link is fine. The handoff is failing.
- Open Settings > Apps > Default apps.
- Look at the web browser entry at the top of the list.
- If no browser is shown, or the wrong one is shown, click the entry and choose your browser, such as Edge or Chrome.
- Go back to Word and Ctrl+Click a link to test it.
- If the browser opens but shows an error, test the same address in the browser directly to check the browser itself.
If the browser is broken, repair or reset it from its own settings, or pick a different browser as the default and test again. This fix also explains links that work on one computer but not another: the two computers simply have different default browsers set.
Fix 11: Check and Clear the Hyperlink Base
Word stores a setting called the hyperlink base in each document’s properties. It tells Word where relative links start from. If the base still points to an old folder, a moved project, or a computer that no longer exists, links that rely on it will fail, even though their addresses look correct in the Edit Hyperlink dialog in Fix 4.
- Open the document and go to File > Info.
- Click the Properties dropdown and choose Advanced Properties.
- Click the Summary tab and look at the Hyperlink base box.
- If it holds an old or wrong folder path, delete everything in the box and leave it blank.
- Click OK, save the document, and Ctrl+Click a link to test it.
Leave the hyperlink base blank unless you deliberately link to many files in one shared folder. A blank base means every link uses its own full address, which is what most documents need. If you do use a shared folder for linked files, set the base to that folder’s current address instead of clearing it.
What to Avoid
- Do not paste addresses as unformatted text and expect links. Use a normal paste, then press Space.
- Do not use # in the names of files you link to. Word cannot follow those links.
- Do not turn off Protected View for all files just to make links work. Enable editing only for files you trust.
- Do not download “link fixer” tools from unknown websites. The fixes in this guide cover every common cause.
- Do not retype every link by hand when a setting is the cause. Check Fix 1 first.
- Do not assume a link is broken because a single click does nothing. Hold Ctrl and click.
Frequently Asked Questions
Why are my hyperlinks not clickable in Word?
The most common reasons are that automatic hyperlinks are off, the address was never activated with Enter or Space, or you are single-clicking instead of Ctrl+Clicking. Check Fixes 1, 2, and 3 in that order.
How do I make a link open with a single click?
Go to File > Options > Advanced, and under Editing options, untick Use CTRL + Click to follow hyperlink. Links will then open with one click, but they become harder to edit, so most people leave the default on.
Why does my link show grey code instead of blue text?
Field codes are showing. Press Alt+F9 to switch back to normal link text. If that does not work, remove the link and add it again as in Fix 5.
Can I link to a heading inside the same document?
Yes. Select the text, press Ctrl+K, choose Place in This Document, and pick the heading or bookmark you want to link to. This is useful for tables of contents and long reports.
Why does a link work on my computer but not on someone else’s?
Links to files on your computer point to a location on your disk, such as C:\Reports\file.docx. That path does not exist on another computer. For shared documents, link to web addresses or to files in a shared folder everyone can reach.
Conclusion
When microsoft word hyperlinks not working interrupts your document, the fix is usually one checkbox or one keypress. Turn on automatic hyperlinks, press Enter or Space after each address, and remember that links need Ctrl+Click to open. Those three habits prevent most link problems before they start.
If a link still fails, work through the 11 fixes: check its address for typos, look for Protected View, and check whether the document is protected. Repair Office only when links fail everywhere. Once your links work, test each one with Ctrl+Click before you send the document, so your readers reach the right page on the first try.
