
Your website loads fine, your posts look normal, and yet no new article ever appears in a feed reader. When wordpress rss feed not working strikes, the feed address returns an error page, a blank screen, or a wall of broken code instead of the clean list of posts that readers and apps expect. Feed readers stop updating, news apps show nothing new, and podcast apps miss new episodes. The website itself can look perfect while the feed quietly fails in the background.
This guide works through the causes in order, from a simple cache clear to a full reinstall of the core files. Every fix uses only official WordPress tools, settings, and files. Work through the fixes one at a time, and open the feed address in a browser after each one to test it. Before the deeper fixes, take a backup of the site, because a backup makes every later change safe to undo.
Table of Contents
- Why This Error Happens
- Quick Checks
- Diagnosing the Problem
- Fix 1: Open the Feed in a Browser and Confirm the Exact Error
- Fix 2: Clear the Site Cache and the Browser Cache
- Fix 3: Resave the Permalink Settings
- Fix 4: Deactivate Plugins One by One to Find a Conflict
- Fix 5: Switch to a Default Theme to Rule Out a Theme Fault
- Fix 6: Check the Feed With an Online Feed Validator
- Fix 7: Remove Blank Lines and Spaces From Theme and Plugin Files
- Fix 8: Fix Character Encoding and Invalid Characters in Posts
- Fix 9: Increase the PHP Memory Limit
- Fix 10: Turn On Debug Mode and Read the Error Log
- Fix 11: Correct the Site Address After a Move or Domain Change
- Fix 12: Fix Feed Redirects and HTTPS Problems
- Fix 13: Clear Stale Feed Transients From the Database
- Fix 14: Check File Permissions and the Server Error Log
- Fix 15: Reinstall the WordPress Core Files
- What to Avoid
- Frequently Asked Questions
- Conclusion
- Helpful Official Resources
Why This Error Happens
An RSS feed is a simple text file written in a strict format called XML. WordPress builds it on the fly from your posts, and feed readers parse it line by line. XML is unforgiving: one stray blank line, one wrong character, or one error message printed before the feed starts, and the whole file is rejected. The website pages still work because browsers forgive small mistakes, but feed readers do not. These are the reasons a feed fails most often.
1. Extra Whitespace Before the Feed Output Starts
The most common cause of a broken WordPress feed is a blank line or a space printed before the XML begins. A theme file or a plugin file with a blank line before its opening PHP tag, or after its closing PHP tag, sends that blank line to the browser first. The feed reader then sees text before the XML declaration and rejects the whole file. The error message usually says the XML declaration is allowed only at the start of the document, which is the reader complaining about exactly that stray output.
2. A Plugin Is Printing an Error or a Notice Into the Feed
Plugins run code every time a page or a feed is built. If a plugin prints a warning, a notice, or a block of HTML while the feed is being built, that output lands inside the XML and breaks it. Caching plugins, security plugins, and plugins that add code to every page are the usual suspects. The fault often starts right after a plugin is installed or updated, which is why wordpress rss feed not working so often follows a routine update that seemed harmless at the time.
3. The Theme Adds Output That Breaks the XML
Themes can break a feed in the same way as plugins. A theme that prints extra markup, loads a broken template part, or calls a function that fails will corrupt the feed output. Child themes and heavily customised themes carry more risk, because a small edit in a theme file can introduce the stray output that XML cannot tolerate. Switching to a default theme is the fastest way to prove or rule out this cause, and Fix 5 covers that test.
4. The Permalink Settings Are Out of Date
WordPress builds the feed address from the permalink settings. If those settings were never saved after a change, or if the rewrite rules stored by WordPress no longer match the settings, the feed address can return a 404 error or redirect to the wrong page. This cause is common after a site move, a domain change, or a settings change, and it is also one of the easiest to fix: resaving the permalinks rebuilds the rewrite rules in seconds.
5. A Cache Is Serving an Old, Broken Copy of the Feed
Caching layers store copies of pages and feeds so the site loads faster. If a broken copy of the feed was cached before the cause was fixed, readers keep receiving the broken copy long after the site itself is healthy. The site owner fixes the real fault, tests the feed, sees the same error, and wrongly concludes the fix failed. Browser caches, plugin caches, server caches, and content delivery networks can each hold a stale copy, and all of them may need clearing.
6. The Server Runs Out of Memory or Blocks the Feed Request
Building a feed takes server memory, especially on sites with many posts, large images, or heavy plugins. If the PHP memory limit is too low, the feed build dies halfway and returns a blank page or a server error. Separately, a security rule, a firewall, or a file permission problem can block the feed request outright. These server-level causes produce blank feeds and 500 errors rather than XML errors, and they need the server checks in Fixes 9 and 14.
Quick Checks
Two minutes before the deep fixes.
- Open the feed address in a browser — add
/feed/to the end of the site address — and read the exact error message. - Check whether the website pages load normally while only the feed fails.
- Check whether the fault started right after a plugin install, a theme change, or a WordPress update.
- Check whether the feed works in a private browser window, which rules out a browser cache problem.
- Check whether a backup of the site exists before you change any file.
- Think about what changed — did wordpress rss feed not working begin after a site move, a domain change, or a new plugin?
Diagnosing the Problem
| Symptom | Cause | Go to Fix |
|---|---|---|
| Error about XML declaration at the start | Stray whitespace before the feed output | Fix 7 |
| Blank white page at the feed address | Fatal error or memory limit reached | Fix 9 |
| Feed shows a 404 not found error | Permalink rewrite rules out of date | Fix 3 |
| Feed worked until a plugin update | Plugin printing output into the feed | Fix 4 |
| Feed fails only in one reader app | Stale cached copy of the feed | Fix 2 |
| Feed shows old posts but never new ones | Stale feed cache or transients | Fix 13 |
| Feed fails after a domain change | Site address settings still point elsewhere | Fix 11 |
| Feed returns a 500 server error | Server fault, permissions, or bad redirect | Fix 14 |
Fix 1: Open the Feed in a Browser and Confirm the Exact Error
Guessing wastes time, and the feed itself usually tells you what is wrong. Opening the feed address in a browser shows the exact error, and different errors point at different fixes. A message about the XML declaration points at stray whitespace. A blank page points at a fatal error or a memory limit. A 404 points at permalinks. Read the message before changing anything, and write it down so you can compare it after each fix.

- Open a browser on a computer and type the site address followed by
/feed/, then press Enter. - Read the full message on the screen and write it down exactly as it appears.
- If the browser shows formatted feed content, the feed itself may be healthy, and the fault may sit with one reader app.
- Press Ctrl + U (or Cmd + Option + U on a Mac) to view the page source, and look for blank lines or error text at the very top.
- Open the same address in a private or incognito window to rule out a browser cache problem.
- Try the alternative feed address by adding
?feed=rss2to the site address, and note whether it behaves the same way. - Compare the result with the table in the Diagnosing section, and jump to the fix it points to first.
- The view-source check matters, because browsers hide stray output that feed readers reject.
- A feed that loads in a private window but fails in a normal window is almost always a browser cache fault.
- If both feed addresses fail in exactly the same way, the fault is in how WordPress builds the feed, not in one address.
- Keep the error message you wrote down, because later fixes are judged by whether that exact message changes or disappears.
Fix 2: Clear the Site Cache and the Browser Cache
A stale cache can keep serving a broken feed long after the real fault is gone, so clearing every cache layer is the right second step. Clear the caching plugin first, then any server cache, then the browser cache, and test the feed after each layer. If the feed suddenly works after one of these clears, the cached copy was the whole problem, and no deeper repair is needed.
- Sign in to the WordPress dashboard and open the caching plugin settings, if one is installed.
- Click the option to purge or delete the whole cache, not just one page.
- If the hosting account has a server cache or a content delivery network, purge that cache from the hosting panel.
- Clear the browser cache, or test in a private window so no cached copy is used.
- Wait one full minute for the caches to rebuild, then open the feed address again.
- If the feed works now, open it twice more over the next hour to confirm the fix holds.
- If the feed still fails, move on to Fix 3, because the fault is being rebuilt fresh each time.
- Purging the whole cache is safe: WordPress rebuilds cached pages on the next visit, and no posts or settings are deleted.
- Do not clear the cache and change settings at the same time, or you will not know which action fixed the feed.
- If cache problems keep returning on this site, our guide to WordPress cache not clearing covers the deeper cache faults.
- When wordpress rss feed not working is caused by a stale copy, this fix ends it in minutes, with no file changes at all.
Fix 3: Resave the Permalink Settings
Permalink settings control how WordPress turns addresses into content, and the feed address depends on them. Resaving the settings forces WordPress to rebuild its rewrite rules, which repairs feed addresses that return 404 errors or redirect wrongly. The fix takes seconds, changes nothing about the posts, and is safe to run even when permalinks look correct.
- Sign in to the WordPress dashboard and open Settings, then Permalinks.
- Read the current permalink structure and confirm it is the one the site should use.
- Without changing any option, scroll down and click Save Changes.
- Wait for the settings saved message, then open the feed address in a new browser tab.
- If the feed still returns a 404, change the structure to Plain temporarily and save.
- Test the feed address again, then switch the structure back to the original setting and save once more.
- Confirm the feed loads, and check that a normal post page still loads with its usual address.
- Resaving does not change any post address; it only rebuilds the rules WordPress uses to match addresses to content.
- The temporary switch to Plain proves whether the rewrite rules were the fault, because plain addresses need no rules at all.
- If post pages also return 404 errors, the permalink fault is site-wide, and our guide to WordPress permalink structure causing 404 covers the deeper repairs.
- A feed that starts working after a resave was never truly broken — its address simply stopped matching the content.
Fix 4: Deactivate Plugins One by One to Find a Conflict
Plugins are the most common source of stray output in a feed, and the only reliable way to find the guilty plugin is to test them one at a time. Deactivating a plugin does not delete its settings in most cases, so the test is safe. Work from the most recently installed or updated plugin backwards, and test the feed after each deactivation until the feed works.
- Sign in to the WordPress dashboard and open Plugins, then Installed Plugins.
- Note which plugins were installed or updated most recently, and start with those.
- Deactivate the first suspect plugin, then open the feed address in a new tab.
- If the feed works, you have found the conflict — leave that plugin off and check for an update or a replacement.
- If the feed still fails, reactivate the plugin and deactivate the next one, testing the feed each time.
- If no single plugin fixes the feed, deactivate all plugins at once and test the feed with none active.
- If the feed works with all plugins off, reactivate them one at a time, testing after each, until the fault returns.
- Test one plugin at a time; deactivating several at once hides which one caused the fault.
- If the dashboard itself will not load, plugins can be deactivated by renaming the plugin folder through the hosting file manager, one folder at a time.
- Plugin conflicts can break more than feeds, and our guide to WordPress plugin conflict fix covers the full conflict-testing method.
- When a plugin is the cause, check whether an update fixes it before replacing it, because the plugin maker may already have repaired the fault.
Fix 5: Switch to a Default Theme to Rule Out a Theme Fault
Themes build the feed output alongside plugins, and a theme fault produces exactly the same broken XML. Switching to a default WordPress theme for a few minutes proves whether the theme is at fault, without losing any theme settings. If the feed works under the default theme, the fault lives in the active theme or its child theme, and the theme files need the checks in Fix 7.
- Sign in to the WordPress dashboard and open Appearance, then Themes.
- Confirm that a default theme such as Twenty Twenty-Five is installed, and install it from the theme directory if it is not.
- Click Activate on the default theme, and confirm the switch when asked.
- Open the feed address in a new browser tab and check whether it loads cleanly.
- If the feed works, the active theme is the cause — keep the default theme active while you investigate the theme files.
- If the feed still fails, the theme is innocent — switch back to the original theme before moving on.
- Note the result either way, because it narrows every fix that follows.
- Switching themes does not delete posts, pages, or media; it only changes how the site looks while the test runs.
- Widgets and menus may need reassigning after a theme switch, so take a screenshot of the layout before switching.
- A child theme fault is still a theme fault: test with the parent theme alone if the child theme is suspected.
- When wordpress rss feed not working survives both the plugin test and the theme test, the fault is deeper, in the files, the settings, or the server.
Fix 6: Check the Feed With an Online Feed Validator
A feed validator reads the feed the way a strict reader does and reports the exact line where the XML breaks. That line number turns a vague failure into a precise target: it tells you whether the fault is stray output at the top, a bad character in a post, or a malformed tag. Run the validator before editing any file, because its report decides which file needs attention.

- Open the W3C Feed Validation Service in a browser on a computer.
- Paste the full feed address into the address box on the validator page.
- Click the validate button and wait for the report to load.
- Read the first error in the report, including its line number, and write it down.
- If the first error points at line 1 or line 2, the fault is stray output before the feed starts — go to Fix 7.
- If the error points at a line inside a post, open that post in the dashboard and check it for odd characters — go to Fix 8.
- If the validator reports that the feed is valid, the fault may sit with one reader app rather than the feed itself.
- Fix the first error first; later errors in the report are often side effects of the first one.
- A validator report that names a plugin file or a theme file tells you exactly where to look in Fix 7.
- Do not paste passwords or private addresses into a validator — only the public feed address is needed.
- When the validator passes but a reader still fails, clear that reader’s cache or remove and re-add the feed in the reader.
Fix 7: Remove Blank Lines and Spaces From Theme and Plugin Files
Stray whitespace is the classic feed killer. A blank line before the opening PHP tag in any file that loads during a feed request prints that blank line before the XML, and the feed is rejected. The usual hiding places are the theme functions file, plugin files, and files edited by hand. The repair is to remove the blank lines and the closing PHP tag where it invites trailing spaces, then test the feed again.
- Take a full backup of the site, or at least download a copy of the file you are about to edit.
- Open the hosting file manager or connect with FTP, and open the active theme folder.
- Open the theme functions file and check the very first line — it must start with the opening PHP tag, with no blank line or space before it.
- Scroll to the end of the file and remove any blank lines after the last line of code, including a closing PHP tag if the file ends with one.
- Repeat the same check for any plugin file named in the validator report from Fix 6.
- Save each file, clear the site cache, and open the feed address to test it.
- If the feed works, restore any plugin you deactivated during testing and confirm the feed still works.
- Edit one file at a time and test after each edit, so you know which file held the stray output.
- Never edit files on a live site without a backup copy of the original file saved on your computer.
- A file edited in a word processor instead of a plain text editor can gain invisible characters — always use a code editor or the hosting file manager.
- When the validator pointed at line 1, this fix is almost always the one that ends the fault.
Fix 8: Fix Character Encoding and Invalid Characters in Posts
A single invalid character inside a post can break the whole feed, because XML rejects characters that do not belong to its declared encoding. Characters pasted from word processors, control characters, and symbols from another encoding are the usual culprits. The validator report from Fix 6 names the line, and the fix is to find the post, clean the bad character, and confirm the site encoding is consistent.
- Open the validator report from Fix 6 and note the line number and the character it complains about.
- Open the feed address in a browser, view the page source, and find the post that contains that line.
- Open that post in the WordPress dashboard and look for pasted content, unusual symbols, or smart quotes around the reported spot.
- Delete and retype the suspicious text by hand, rather than pasting it again from the same source.
- Check Settings, then Reading, and confirm the feed encoding setting matches the site language encoding.
- Save the post, clear the site cache, and run the validator again to confirm the error is gone.
- If the error moves to a different post, repeat the cleaning on that post until the validator passes.
- Pasting from a word processor is the most common source of bad characters; paste as plain text instead.
- Do not delete the whole post to fix one character — retyping the affected sentence is enough.
- If many posts carry bad characters, fix the newest posts first, because the feed shows recent posts and readers only see those.
- A feed that validates after this fix was broken by content, not by code, and no plugin or theme change is needed.
Fix 9: Increase the PHP Memory Limit
A feed that returns a blank page or a 500 error, with no XML message at all, often means the server ran out of memory while building the feed. WordPress, the theme, and the plugins all draw from the same PHP memory pool, and a low limit kills the feed build halfway. Raising the limit gives the feed room to build, and the change is a single line in the site configuration file.
- Sign in to the hosting panel and open the file manager, then open the site root folder.
- Find the WordPress configuration file and download a backup copy to your computer.
- Open the file for editing and look for the line that sets the memory limit, near the database settings.
- If the line exists, raise its value to
256M; if it does not exist, add the memory limit line above the line that says to stop editing. - Save the file, clear the site cache, and open the feed address to test it.
- If the feed works, check that the rest of the site still loads normally.
- If the feed still fails, note the result and move to Fix 10, because the fault is an error rather than a limit.
- Do not raise the limit far above what the hosting plan allows; a value the server cannot honour is ignored.
- If the hosting panel offers a PHP settings page, raising the limit there is safer than editing the file by hand.
- A memory limit that keeps being reached points at a heavy plugin or theme, which the plugin test in Fix 4 can identify.
- When wordpress rss feed not working shows a blank page, this fix and the debug log in Fix 10 work as a pair.
Fix 10: Turn On Debug Mode and Read the Error Log
When the feed fails silently, the error log holds the answer. WordPress debug mode writes PHP errors, warnings, and fatal errors to a log file instead of hiding them, and the log names the file and line that failed. Turn debug mode on, load the feed once, read the log, then turn debug mode off again so errors are never shown to visitors.

- Download a backup copy of the WordPress configuration file before editing it.
- Open the file and find the debug setting line, then change its value so debugging is turned on.
- Add the lines that send debug output to a log file and stop it showing on screen, if they are not already present.
- Save the file, then open the feed address once in a browser to trigger the error.
- Open the debug log file in the content folder and read the newest entries at the bottom.
- Note the file path and line number in the newest fatal error, and match it to a plugin, theme, or core file.
- Turn debug mode off again by restoring the original value, then fix or deactivate the file the log named.
- Never leave debug mode showing errors on screen on a live site, because error messages can reveal file paths to visitors.
- The newest log entries matter most; older entries may describe faults that were already fixed.
- A fatal error naming a plugin file confirms the plugin test result from Fix 4 and tells you exactly which plugin to update or replace.
- If the log is empty after loading the feed, the fault is probably not a PHP error — return to the cache and permalink fixes.
Fix 11: Correct the Site Address After a Move or Domain Change
After a site move or a domain change, the two address settings in WordPress can still point at the old address. The feed then builds links to the old domain, or the feed address itself redirects away, and readers receive errors or stale content. Correcting both address settings and resaving the permalinks restores the feed to the current domain.
- Sign in to the WordPress dashboard and open Settings, then General.
- Read the WordPress Address and Site Address fields and confirm both show the current domain.
- Correct either field that still shows the old domain, taking care with
httpversushttps. - Click Save Changes, then sign in again if WordPress asks you to.
- Open Settings, then Permalinks, and click Save Changes to rebuild the rewrite rules.
- Open the feed address and confirm it loads and that its links use the current domain.
- If the dashboard itself is unreachable, correct the addresses in the configuration file instead, using the two address constants.
- Change both address fields together; a mismatch between them breaks feeds, logins, and media links alike.
- Take a backup before changing the addresses, because a wrong address can lock you out of the dashboard.
- A domain change can break other discovery files too, and our guide to WordPress sitemap not found covers the sitemap side of the same move.
- After an address correction, tell readers to re-add the feed if their reader cached the old address.
Fix 12: Fix Feed Redirects and HTTPS Problems
Redirects that loop, point at the wrong address, or mix secure and insecure addresses can stop a feed loading even when the feed itself is valid. A feed address that redirects to the homepage, or that bounces between the plain and secure versions of the address, never delivers XML to the reader. The repair is to check the redirect chain, confirm the site uses one consistent address, and remove any feed redirect rule that sends readers elsewhere.
- Open the feed address in a browser and watch the address bar for redirects before the page loads.
- Open the feed address with the plain
httpversion and the securehttpsversion, and note whether both end at the same final address. - Open Settings, then General, and confirm both address fields use the secure
httpsversion. - Check the redirect settings in any redirect plugin, and remove any rule that targets the feed address.
- Check the server redirect file for rules that mention the feed, and remove or correct any that loop.
- Clear the site cache and the browser cache, then open the feed address again.
- If the feed loads now, run the validator from Fix 6 once more to confirm the XML is clean.
- One redirect from the plain address to the secure address is normal; a chain of several redirects, or a loop, is not.
- Security plugins sometimes add redirect rules automatically after an HTTPS change — check their settings before editing server files.
- Mixed content warnings on pages are a separate fault, but they share the same root cause: an address setting that still uses the plain version.
- A feed that redirects to the homepage is usually a permalink or redirect-rule fault, not a feed-content fault.
Fix 13: Clear Stale Feed Transients From the Database
WordPress stores temporary feed data, called transients, in the database to speed up feed building. If a transient holds a broken or outdated copy of the feed, readers keep receiving it even after the underlying fault is fixed. Clearing the stale transients forces WordPress to rebuild the feed from the current posts, and the fix is safe because transients are rebuilt automatically.
- Take a backup of the database before making any database change.
- Sign in to the hosting panel and open the database management tool.
- Open the site database and find the options table, which holds the transient records.
- Search the table for rows whose names contain the feed transient markers, and note how many exist.
- Delete only the expired feed transient rows, leaving all other settings untouched.
- If you prefer not to edit the database by hand, use a reputable database optimisation plugin and run its transient cleanup.
- Clear the site cache, open the feed address, and confirm new posts now appear.
- Delete only transient rows; deleting other options rows can break site settings.
- A backup taken before the cleanup makes the whole operation reversible in minutes.
- Transients rebuild on the next feed request, so the feed may load slowly once and then return to normal speed.
- When the feed shows old posts but never new ones, stale transients are a prime suspect after the cache checks.
Fix 14: Check File Permissions and the Server Error Log
If every WordPress-level fix has failed, the fault may sit below WordPress, in the server itself. Wrong file permissions can stop WordPress reading the files it needs to build the feed, and server rules can block the request. The server error log records these failures with timestamps, and matching a log entry to the moment you loaded the feed points at the exact file or rule.

- Sign in to the hosting panel and open the server error log for the site.
- Note the current time, then open the feed address once in a browser to trigger the fault.
- Refresh the error log and read the newest entries, looking for permission denied or server error lines.
- Open the hosting file manager and check the permissions on the site folders and the main files.
- Correct any folder that is not readable and executable, and any file that is not readable, using the hosting panel values.
- Check the server configuration file for rules that block feed addresses, and remove any that target them.
- Clear the site cache, open the feed address, and confirm the log shows no new error for the feed request.
- Do not set permissions to wide-open values to “make it work” — over-permissive files are a security risk.
- If the log names a security module blocking the request, ask the hosting provider to review the rule rather than disabling security yourself.
- A server error that appears only for the feed address, and never for pages, usually means a rule targets the feed path specifically.
- When the log shows nothing at all, the fault is probably still inside WordPress — revisit Fixes 4, 7, and 10.
Fix 15: Reinstall the WordPress Core Files
When every targeted fix has failed, the core WordPress files themselves may be damaged or incomplete. Reinstalling the core files replaces them with fresh copies from WordPress, while leaving posts, pages, media, themes, and plugins untouched. It is the last resort because it touches the whole installation, but it is safe when run from the dashboard, and it ends faults that no single-file repair can reach.
- Take a full backup of the site, including the database, before starting.
- Sign in to the WordPress dashboard and open Dashboard, then Updates.
- Click the button to reinstall the current version of WordPress, and wait for the process to finish.
- Do not close the browser tab or navigate away while the reinstall runs.
- When the reinstall completes, open the feed address and check whether it loads cleanly.
- Resave the permalink settings, as in Fix 3, to rebuild the rewrite rules after the reinstall.
- Test the site pages, the feed, and one reader app, and confirm all three work before calling the fault fixed.
- The dashboard reinstall never touches the content folder, so themes, plugins, and uploads stay exactly as they were.
- If the dashboard is unreachable, the same reinstall can be done by uploading fresh core files over the old ones, excluding the content folder and the configuration file.
- After a reinstall, check for pending updates to themes and plugins, because an outdated add-on can reintroduce the fault.
- When wordpress rss feed not working survives a core reinstall, the fault is almost certainly in the server configuration, and the hosting provider is the right next call.
What to Avoid
- Do not edit theme or plugin files without a backup copy of the original file saved on your computer.
- Do not leave debug mode showing errors on screen on a live site — errors can reveal file paths to visitors.
- Do not delete database rows other than expired transients — deleting settings rows can break the whole site.
- Do not use pirated themes, plugins, or nulled software — they often carry hidden code that breaks feeds and invites malware.
- Do not set file permissions to wide-open values to force the feed to work — that creates a security hole.
- Do not paste passwords or private addresses into an online validator — only the public feed address is needed.
- Do not change several settings at once — test the feed after each fix, or you will never know what worked.
Frequently Asked Questions
What is the most common cause of wordpress rss feed not working?
A blank line or a space printed before the feed output is the most common cause. A theme or plugin file with whitespace before its opening PHP tag sends that whitespace first, and feed readers reject the whole file because XML must start with its declaration. Fix 7 removes the stray whitespace, and the validator in Fix 6 confirms the exact line where the fault sits.
Why does my website load fine while the feed fails?
Because browsers forgive small mistakes and feed readers do not. A stray blank line, a warning message, or a bad character is invisible on a web page but fatal in XML. The feed is a strict data file, so it exposes faults that pages hide. That is also why the feed can break after an update that leaves the visible site looking perfect.
How do I find my WordPress feed address?
Add /feed/ to the end of the site address. A second form adds ?feed=rss2 to the site address instead. Both should return the same list of recent posts. If one form works and the other does not, the fault is usually in the permalink rewrite rules, and Fix 3 repairs them.
Can a caching plugin break the feed?
Yes, in two ways. A caching plugin can serve a stale broken copy of the feed after the real fault is fixed, and a misconfigured cache can store the feed with the wrong content type. Clearing the cache, as in Fix 2, separates the two cases: if the feed works after a purge, the cache was serving the old copy.
Will reinstalling WordPress delete my posts?
No. The dashboard reinstall in Fix 15 replaces only the core files. Posts, pages, comments, media, themes, and plugins live in the database and the content folder, which the reinstall leaves untouched. Take a backup first anyway, because no major site operation should run without one.
Should I redirect my feed through a third-party feed service?
Only if you need its features, such as subscriber statistics. A redirect adds a link in the chain that can break, and it can delay new posts reaching readers. Fix the native feed first with this guide, and only add a redirect afterwards if the extra features are worth the extra moving part.
Conclusion
When wordpress rss feed not working hides your new posts from readers, start with the cache and the permalinks, then test plugins and the theme, then let the validator and the debug log point at the exact file. Most feeds fail on stray whitespace or a single conflicting plugin, and both are quick repairs once found. Finish by running the validator once more and confirming a reader app shows the newest post, because a passing validator and a fresh post in a reader are the two proofs that the feed is truly healthy again.
