
The table looked fine when you made it. Now the columns are uneven, text spills oddly, borders vanish on some cells, and every attempt to fix it makes it worse. A microsoft word table formatting problem is one of Word’s most complained-about quirks — tables have more interacting settings than they appear to, and one wrong one cascades.
The good news: messy tables respond to methodical fixes. Table Properties, AutoFit, wrapping, and borders each control one aspect, and this guide addresses them in order. Work through the fixes that match your symptom; most tables are tidy again within minutes.
Table of Contents
- Quick Checks
- Diagnosing microsoft word table formatting problem
- Fix 1: Open Table Properties
- Fix 2: AutoFit Columns to Contents
- Fix 3: Set Text Wrapping to None
- Fix 4: Fix Borders and Shading
- Fix 5: Fix Pasted Tables with Paste Options
- Fix 6: Check Cell Margins and Alignment
- Fix 7: Copy the Table into a New Document
- What to Avoid
- Frequently Asked Questions
- Conclusion
- Helpful Official Resources
Quick Checks
Instant triage for a messy table.
- Click inside the table: do the Table Design and Layout tabs appear? If not, Word does not recognise it as a table (it may be tabbed text).
- Check if the table was pasted from the web or Excel — pasted tables bring hostile formatting (Fix 5).
- Try selecting the whole table (click the four-arrow handle at its top-left) before applying fixes — many settings need the full selection.
- Undo (Ctrl+Z) your last few changes if the mess just started — you may simply reverse into a working table.
- Check the document is in Print Layout view — tables look wrong in Draft view.
Diagnosing microsoft word table formatting problem
| Symptom | Cause | Go to Fix |
|---|---|---|
| Columns wildly uneven | AutoFit or manual widths tangled | Fix 2 |
| Table floats and text wraps oddly | Text wrapping set to Around | Fix 3 |
| Borders missing on some cells | Border settings per-cell | Fix 4 |
| Mess started after pasting | Imported formatting | Fix 5 |
| Text cramped against cell edges | Cell margins too tight | Fix 6 |
| Nothing helps, table is cursed | Corrupt table structure | Fix 7 |
Fix 1: Open Table Properties
Table Properties is mission control: alignment, width, wrapping, and borders all live here. Most table rescues start in this dialog.

- Right-click inside the table and choose “Table Properties”.
- On the Table tab, check Alignment (usually Left or Center) and set a sensible preferred width (e.g. 100% of the page, or Auto).
- Check “Text wrapping” — for a well-behaved table it should be “None” (see Fix 3).
- On the Column tab, check the preferred widths — clear any bizarre values.
- On the Cell tab, check vertical alignment (usually Top).
- Click OK and observe. Half of all table weirdness surrenders here.
Get comfortable with this dialog; you will return to it. It shows the truth about the table’s settings, unlike the visual mess on the page. If Word itself is unstable, our Microsoft Word not responding guide covers that.
Fix 2: AutoFit Columns to Contents
Uneven columns — one huge, one squashed — are usually an AutoFit tangle. Resetting the widths evens everything out.

- Click inside the table, then go to the Layout tab (under Table Tools).
- Click “AutoFit” and choose “AutoFit to Contents” — columns shrink to fit their text.
- If that looks too cramped, choose “AutoFit to Window” to spread the table across the page.
- For full manual control, choose “Fixed Column Width”, then drag column borders to exact sizes.
- To make all columns equal: select the table, then Layout > “Distribute Columns”.
“Distribute Columns” is the instant cure for the classic “first column is enormous” problem. And if you need precise widths (for forms or reports), Fixed Column Width plus manual dragging gives total control. For read-only table troubles, see Microsoft Word document read-only mode.
Fix 3: Set Text Wrapping to None
A table with text wrapping set to “Around” floats over the page like an image — text flows around it, positioning goes mad, and the table jumps when you type nearby.
- Right-click the table > Table Properties > Table tab.
- Set “Text wrapping” to “None”.
- Click OK. The table now sits inline with the text flow, behaving predictably.
- If you genuinely want text beside the table, keep “Around” but click “Positioning” and set exact horizontal/vertical positions — floating tables need explicit coordinates.
- After changing wrapping, re-check column widths (Fix 2) — wrapping changes sometimes disturb them.
“Nine times out of ten, set wrapping to None” is the practical rule. Floating tables have their uses in newsletters and brochures, but for ordinary documents they cause far more pain than benefit.
Fix 4: Fix Borders and Shading
Borders that appear on some cells and vanish on others are a per-cell setting issue. The Borders and Shading dialog shows exactly what is applied where.

- Select the whole table (four-arrow handle at top-left).
- Go to Table Design > Borders > “Borders and Shading”.
- On the Borders tab, choose “All” under Setting to apply borders to every cell.
- Pick a style, colour, and width you like, then click OK.
- If borders still vanish in print preview, check they are real borders and not just gridlines: Table Design > “View Gridlines” toggles the faint non-printing guides.
- For shading issues, use the Shading tab in the same dialog — or Table Design > Shading for quick fills.
Gridlines versus borders is the classic confusion: gridlines show on screen but never print, while borders print. If your “borders” disappear on paper, they were gridlines all along. For presentation tables that will not behave, our PowerPoint presentation not opening guide is the Office-sibling read.
Fix 5: Fix Pasted Tables with Paste Options
Tables pasted from websites or Excel arrive with hostile formatting: merged cells, fixed widths, background colours, and inline styles that fight Word’s table engine.

- After pasting, click the little Paste Options icon (clipboard) that appears near the table.
- Choose “Keep Text Only” for the cleanest result — you get the data, none of the formatting — then reformat with Table Styles.
- Or choose “Merge Formatting” to keep structure but adopt your document’s styles.
- For Excel data, consider Paste Special > “Unformatted Text”, then Convert Text to Table (Insert > Table > Convert Text to Table).
- After pasting cleanly, apply a Table Style from the Table Design tab for instant professional formatting.
- Never choose “Keep Source Formatting” for web tables unless you enjoy pain.
“Keep Text Only” plus a Table Style is the professional workflow: clean data in, beautiful table out, zero inherited chaos. It takes ten seconds longer than a raw paste and saves ten minutes of repair.
Fix 6: Check Cell Margins and Alignment
Text jammed against cell borders, or vertically centred when you want top-aligned, is a cell-margins issue — separate from column widths.
- Select the table, go to Layout > Cell Margins (in the Alignment group, click the small launcher or find “Cell Margins”).
- Set comfortable margins (0.08″ / 0.2 cm is a good default) on all sides.
- Set vertical alignment per cell or for the whole table: Layout > Align Top/Center/Bottom.
- Check paragraph spacing inside cells too — big “Space After” values in cell paragraphs create phantom padding.
- For header rows, consider bold + shading rather than bigger margins for emphasis.
Cell margins are the table equivalent of padding in web design. When text looks “wrong” but widths and borders are fine, margins are almost always the answer.
Fix 7: Copy the Table into a New Document
Some tables are corrupt at the structural level — invisible damage no dialog can reach. A fresh document gives the table a clean home.
- Select the table and copy it (Ctrl+C).
- Open a new blank Word document.
- Paste with “Keep Text Only” (see Fix 5) to strip all corruption.
- Rebuild the table formatting with Table Styles — it takes minutes on clean data.
- Alternatively, convert the table to text (Layout > Convert to Text), copy the clean text over, and convert back to a table (Insert > Table > Convert Text to Table).
- If the new-document table behaves, the old document’s styles or template were part of the problem.
This is the “scorched earth” fix, but it is fast: clean data plus a fresh table style beats an hour of fighting corruption. If Office apps are crashing during all this, see Office apps crashing on startup.
What to Avoid
- Do not drag column borders randomly hoping for the best — use Distribute Columns or AutoFit first.
- Do not paste web tables with “Keep Source Formatting” — you are importing chaos.
- Do not confuse gridlines with borders — only borders print.
- Do not nest tables inside tables unless you must — nested tables multiply every problem.
- Do not set exact row heights “to make it tidy” — exact heights clip text when content grows.
- Do not fight a corrupt table for an hour — Fix 7’s fresh start is faster.
Frequently Asked Questions
Why do my table columns keep changing width when I type?
AutoFit is resizing columns to fit content as you type. Set “Fixed Column Width” (Layout > AutoFit > Fixed Column Width) to lock widths, then adjust manually.
Why do table borders not print?
You are seeing gridlines (non-printing guides), not borders. Apply real borders via Table Design > Borders > Borders and Shading, and check in Print Preview.
How do I make all columns the same width?
Select the table, go to the Layout tab, and click “Distribute Columns”. Instant equal widths.
Why does text wrap strangely around my table?
The table’s text wrapping is set to “Around”. Change it to “None” in Table Properties (Fix 3) and the table sits inline properly.
Can I stop Word splitting my table across pages?
Yes: select the table, Table Properties > Row tab, and untick “Allow row to break across pages”. For header rows, tick “Repeat as header row at the top of each page” so the header reappears.
Why does pasting a table from Excel ruin the formatting?
Excel cells carry their own formatting, column widths, and sometimes merged cells that Word interprets differently. Use Paste Special (Ctrl+Alt+V) and choose “HTML Format” to keep it close to the original, or “Unformatted Text” and rebuild the table in Word for full control. The middle path — paste normally, then use the Paste Options button to switch between “Keep Source Formatting” and “Merge Formatting” — works for most cases.
Can I set a default table style for all new tables?
Yes. Insert a table, format it the way you like, then on the Table Design tab right-click your style and choose “Set as Default”. Every new table in that document — and in new documents based on the same template — will start with your style. This saves enormous time if you build reports with consistent table formatting.
Why do table borders look fine on screen but print with gaps?
Printers render hairline borders differently than screens, and cell spacing or cell margins can open tiny gaps. In Table Properties, set cell spacing to 0 and check that borders are at least ½ pt. If gaps persist, it is usually the printer driver — try printing to PDF first; if the PDF is clean, the driver is the culprit, not Word.
Conclusion
A microsoft word table formatting problem is never mysterious once you know where each setting lives: widths in AutoFit, flow in Text Wrapping, lines in Borders and Shading, padding in Cell Margins. Fix the matching setting, paste cleanly from outside sources, and keep a fresh-document rebuild in reserve for the truly cursed tables. Tidy tables are a few clicks away — they always were.

[…] section breaks. If your document’s tables are behaving oddly around breaks, our guide to Microsoft Word table formatting problems covers the table side of the […]
[…] that it turns into a link. If tables in your document also misbehave after a repair, our guide to Microsoft Word table formatting problems covers that side of Word […]