
When the windows 11 print spooler keeps stopping, printing becomes impossible. You hit print, nothing happens, and the printer queue shows an error. You restart the spooler service, it runs for a few minutes, then stops again. The cycle repeats every time you need to print something urgently.
The Print Spooler is the Windows service that manages all print jobs. It crashes repeatedly for a few well-known reasons: a corrupted print job stuck in the queue, a bad printer driver, conflicting old drivers, or the service’s recovery settings telling it to stay stopped after a failure. This guide fixes each cause in order, starting with the quick service restart and ending with a clean printer reinstall.
Table of Contents
- Quick Checks
- Diagnose the Problem
- Fix 1: Restart the Print Spooler Service
- Fix 2: Clear Stuck Print Jobs From the Spool Folder
- Fix 3: Set the Print Spooler Startup Type to Automatic
- Fix 4: Make the Service Restart Itself After a Failure
- Fix 5: Update or Reinstall the Printer Driver
- Fix 6: Remove Old and Duplicate Printer Drivers
- Fix 7: Run the Built-In Printer Troubleshooter
- Fix 8: Remove and Re-Add the Printer
- What to Avoid
- Frequently Asked Questions
- Conclusion
- Helpful Resources
Quick Checks
- Restart both the printer and the PC. A surprising number of spooler crashes clear with a fresh start of both devices.
- Check the printer for jams, low ink, or open covers. A printer in an error state can crash the spooler when jobs pile up.
- Cancel all pending print jobs from the queue before restarting the service.
- Unplug the printer’s USB cable (or disconnect it from Wi-Fi) while you troubleshoot, so new jobs cannot arrive mid-fix.
- Try printing a test page after each fix to confirm the spooler stays running.
- Note when the crashes happen. If the spooler dies the moment you print a specific document, that file or its driver settings are the trigger.
Diagnose the Problem
| Symptom | Cause | Go to Fix |
|---|---|---|
| Spooler stops within seconds of starting | Corrupted print job stuck in the queue | Fix 2 |
| Spooler runs until you print, then dies | Bad or incompatible printer driver | Fix 5 |
| Spooler is stopped after every reboot | Startup type set to Manual or Disabled | Fix 3 |
| Spooler crashes and never restarts itself | Recovery options set to “Take No Action” | Fix 4 |
| Crashes started after adding a second printer | Conflicting or duplicate printer drivers | Fix 6 |
| Spooler stops when printing PDFs only | Damaged application print settings or driver rendering issue | Fix 5 |
| “Print Spooler service is not running” error in apps | Service crashed and needs a restart plus a root-cause fix | Fix 1 |
| Nothing helps after driver updates | Broken printer installation or corrupted port settings | Fix 8 |
Fix 1: Restart the Print Spooler Service
The fastest way to get printing again is a manual restart of the service. This clears the crashed state and lets new print jobs flow. On its own it is temporary, so treat it as step one and continue with the fixes below to stop the crashes permanently.
- Press Win + R, type services.msc, and press Enter.
- Scroll down the list and find Print Spooler.
- Right-click it and choose Restart. If Restart is greyed out, choose Start instead.
- Wait for the status column to show Running.
- Try printing a test page: go to Settings > Bluetooth & devices > Printers & scanners, select your printer, and choose Print a test page if available.
- If the service stops again within minutes, move on to Fix 2. The restart worked, but something is crashing it.

Fix 2: Clear Stuck Print Jobs When Windows 11 Print Spooler Keeps Stopping
A single corrupted print job can crash the spooler every time the service tries to process it. The job sits in the spool folder, the service starts, hits the bad file, and dies. Deleting the stuck files breaks the cycle.
- Press Win + R, type services.msc, and press Enter.
- Right-click Print Spooler and choose Stop. The service must be stopped before you touch its files.
- Press Win + R again, type %WINDIR%\System32\spool\PRINTERS, and press Enter.
- Delete every file inside the PRINTERS folder. These are only queued print jobs, not your documents.
- Go back to the Services window, right-click Print Spooler, and choose Start.
- Set the startup type to Automatic while you are there (see Fix 3), then test printing.

Fix 3: Set the Print Spooler Startup Type to Automatic
If the spooler is set to start manually, it will not be running after a reboot, and some apps report this as the service “stopping.” Setting it to Automatic means Windows starts it on every boot and keeps it running.
- Press Win + R, type services.msc, and press Enter.
- Double-click Print Spooler to open its properties.
- On the General tab, set Startup type to Automatic.
- If the service is not running, click Start.
- Click Apply, then OK.
- Restart your PC and check that the Print Spooler shows Running in the Services window without you touching it.
Fix 4: Make the Service Restart Itself After a Failure
Windows services have a built-in Recovery tab that controls what happens after a crash. If it is set to take no action, one crash means the spooler stays dead until you restart it by hand. Telling it to restart automatically turns an annoying crash into a brief hiccup.
- Press Win + R, type services.msc, and press Enter.
- Double-click Print Spooler and go to the Recovery tab.
- Set First failure, Second failure, and Subsequent failures all to Restart the Service.
- Set Restart service after to 1 minute.
- Click Apply, then OK.
- This does not fix the underlying crash, so keep working through the driver fixes below. It simply keeps you printing while you do.
Fix 5: Update or Reinstall the Printer Driver
Bad printer drivers are the most common root cause of repeated spooler crashes. A driver written for an older Windows version, or one damaged by an update, can take the whole spooler down every time a job arrives. A clean, current driver from the manufacturer fixes this properly.
- Open Settings > Bluetooth & devices > Printers & scanners and note your exact printer model.
- Visit the printer manufacturer’s official support website and download the latest Windows 11 driver for your model.
- Press Win + R, type appwiz.cpl, and press Enter to open Programs and Features, or use Settings > Apps > Installed apps.
- Uninstall the old printer software and driver package.
- Restart your PC.
- Install the driver you downloaded and follow the manufacturer’s setup steps.
- Print a test page and watch the spooler for ten minutes to confirm it stays running.

Fix 6: Remove Old and Duplicate Printer Drivers
Leftover drivers from printers you no longer own can conflict with your current driver and crash the spooler. Windows keeps these old drivers around silently. The Print Management console shows them all and lets you remove the ones you do not need.
- Press Win + R, type printmanagement.msc, and press Enter. If it does not open, you can skip to Fix 7.
- Expand Custom Filters and select All Drivers.
- Look for drivers belonging to printers you no longer use, or duplicate entries for your current printer.
- Right-click an unneeded driver package and choose Remove Driver Package.
- Never remove the driver for the printer you are trying to fix.
- Restart the Print Spooler service afterwards and test printing.
Fix 7: Run the Built-In Printer Troubleshooter
Windows 11 includes an automated printer troubleshooter that checks the spooler, the queue, the drivers, and the printer connection in one pass. It is worth running because it sometimes catches configuration issues the manual steps miss.
- Open Settings > System > Troubleshoot > Other troubleshooters.
- Find Printer in the list and click Run.
- Follow the on-screen questions and let the troubleshooter apply its fixes.
- If it reports that it fixed the spooler, restart your PC to make sure the fix holds.
- If it says it could not identify the problem, continue with Fix 8.
- On newer Windows 11 builds, the same troubleshooter is also available through the Get Help app.

Fix 8: Remove and Re-Add the Printer
When everything else fails, the printer’s installation itself may be damaged: a broken port, a corrupted configuration, or mismatched settings that survive driver updates. Removing the printer completely and adding it fresh rebuilds the whole setup.
- Open Settings > Bluetooth & devices > Printers & scanners.
- Select your printer and click Remove. Confirm the removal.
- Restart your PC.
- Reconnect the printer: plug in the USB cable or make sure it is on the same Wi-Fi network and powered on.
- Back in Printers & scanners, click Add device and let Windows find the printer.
- If Windows does not find it, click Manually add and follow the wizard with the connection details from your printer’s manual.
- Install the manufacturer’s driver if Windows installs only a basic one, then print a test page.
What to Avoid
- Do not download “spooler fixer” tools from third-party sites. They are unnecessary and often bundle unwanted software.
- Do not delete files from the spool folder while the service is running. Stop the spooler first, or the files stay locked.
- Do not disable the Print Spooler permanently to “stop the errors.” That only hides the problem and breaks all printing.
- Do not install drivers from unofficial download sites. Use the manufacturer’s official page or Windows Update.
- Do not ignore the Recovery tab settings. Leaving them on “Take No Action” guarantees every future crash needs a manual restart.
- Do not print the same crashing document repeatedly without investigating. If one specific file kills the spooler, the file itself may be corrupted.
Frequently Asked Questions
Why does my print spooler keep stopping on Windows 11?
The usual causes are a corrupted print job stuck in the queue, a faulty printer driver, or conflicting old drivers. The service starts, hits the bad job or driver, and crashes. Clearing the spool folder and updating the driver resolve it in most cases. The Recovery tab trick in Fix 4 keeps the service restarting itself while you work on the root cause.
How do I restart the print spooler?
Press Win + R, type services.msc, and press Enter. Find Print Spooler in the list, right-click it, and choose Restart. If it is stopped, choose Start instead. The status should change to Running. If it stops again quickly, a stuck job or bad driver is crashing it, so continue with Fixes 2 and 5.
Is it safe to delete files in the spool PRINTERS folder?
Yes, as long as you stop the Print Spooler service first. The folder only contains queued print jobs waiting to be printed. Deleting them cancels those jobs but harms nothing else. Your documents, apps, and printer settings are completely unaffected.
Can a Windows update break the print spooler?
Yes. Updates sometimes replace printer drivers with incompatible versions or change printing components. If the crashes started right after an update, check for newer updates that may contain the fix, or reinstall the manufacturer’s driver for your printer model. The troubleshooter in Fix 7 also detects update-related configuration damage.
Why does the spooler crash only when I print PDFs?
PDF printing uses the driver’s rendering path heavily, so a damaged driver shows up first with PDFs. Update or reinstall the printer driver with Fix 5. As a workaround, try the “Print as image” option in your PDF reader’s advanced print settings, which sends simpler data to the driver.
Do I need the Print Spooler service if I never print?
If you truly never print, the service sitting idle does no harm. Do not disable it just to silence errors, though, because some apps and Windows features expect it to exist. It is better to fix the crashing cause with the steps above than to disable a core Windows service.
What is the difference between restarting and resetting the print spooler?
Restarting stops and starts the service, which clears a crashed state. Resetting, as in Fix 2, goes further: it deletes all queued jobs from the spool folder so a corrupted job cannot crash the service again on startup. For a spooler that keeps stopping, do both: clear the folder, then restart the service.
Will removing and re-adding my printer delete my scan settings?
Removing the printer deletes its Windows configuration, including custom print preferences. Your documents are safe. Scan profiles stored in the manufacturer’s software may need to be set up again after reinstalling. Take a quick photo of any special settings before you remove the printer, so you can restore them in a minute.
Conclusion
A windows 11 print spooler keeps stopping loop is annoying, but it follows a predictable pattern: restart the service, clear the stuck jobs, set it to start automatically and recover itself, then fix the driver underneath. Those eight steps end the cycle for nearly everyone. If the spooler still dies after a clean driver install and a fresh printer setup, the printer’s firmware or a deeper Windows issue may be involved, and the manufacturer’s support line is your next stop.
