Microsoft Word Autocorrect Not Working? 11 Fixes That Actually Work

A Word document with misspelled words left uncorrected on screen
When AutoCorrect stops working, typos stay exactly as you typed them.

You type “teh” and it stays “teh”. You type two capital letters at the start of a word and Word leaves them alone. When microsoft word autocorrect not working is the problem, the small fixes you never think about have quietly stopped happening, and your documents start to look careless.

The good news is that this is almost always a settings problem, not a broken Word. A single checkbox, a wrong language, or one bad entry in the AutoCorrect list can switch the whole feature off. This guide starts with the quickest checks and works up to a full Office repair, so you can stop at the fix that works for you.

Table of Contents

  • Why This Error Happens
  • Quick Checks
  • Diagnosing the Problem
  • Fix 1: Turn On Replace Text as You Type
  • Fix 2: Check the Proofing Language
  • Fix 3: Turn On Spelling Checker Suggestions
  • Fix 4: Clear a Bad AutoCorrect Entry
  • Fix 5: Check AutoFormat As You Type
  • Fix 6: Test in a New Blank Document
  • Fix 7: Check Exceptions for This Document
  • Fix 8: Disable Conflicting Add-ins
  • Fix 9: Update and Repair Office
  • Fix 10: Rename the Normal Template (Normal.dotm)
  • Fix 11: Delete the Corrupted AutoCorrect List File
  • What to Avoid
  • Frequently Asked Questions
  • Conclusion

Why This Error Happens

1. Replace Text as You Type Is Switched Off

AutoCorrect only works when its main switch is on. The setting is called Replace text as you type, and it lives in the AutoCorrect Options dialog. If someone turned it off, or a shared computer had it changed, Word will stop fixing typos at once. Nothing else changes. Spellcheck still underlines words, but no correction happens as you type. This is the most common cause, and it takes less than a minute to check.

2. The Proofing Language Does Not Match Your Text

Word checks spelling and AutoCorrect against one language at a time. If your document is set to French, German, or another language while you type in English, AutoCorrect looks up your words in the wrong dictionary. It finds no matches, so it corrects nothing. This often happens with documents copied from the web, shared by a colleague, or created from a template in another language.

3. Spelling Checker Suggestions Are Turned Off

AutoCorrect leans on the spelling checker for many of its fixes. If the option to use suggestions from the spelling checker is off, Word will not offer or apply the corrections it would normally make. You may still see red underlines, but the automatic part of the process is gone. This setting can change after an Office update or when a new user profile is created on the computer.

4. A Bad Entry Sits in the AutoCorrect List

The AutoCorrect list holds pairs of words: what you type, and what Word replaces it with. If a wrong entry was added by mistake, Word may replace a correct word with a wrong one, or seem to do nothing at all. A damaged AutoCorrect list file can also stop the feature from loading. In both cases the fix is inside the same dialog, and it does not affect your document text.

5. The Text Is Marked “Do Not Check Spelling”

Word lets you mark text so the spelling checker skips it. Text pasted from another program often arrives with this marking switched on. When it is on, AutoCorrect skips that text too. The rest of the document may correct normally, which makes the problem look random. It usually affects pasted paragraphs, quoted text, and content copied from web pages.

6. An Add-in or an Outdated Build Gets in the Way

Add-ins can hook into typing and block AutoCorrect from running. Grammar tools, clipboard managers, and older add-ins are the usual suspects. An outdated Office build can also carry a bug that breaks AutoCorrect until it is patched. If AutoCorrect stopped working right after an update or after installing new software, this cause moves to the top of the list.

Quick Checks

Run these checks before you change any settings. They take about a minute.

  • Type “teh” followed by a space in a new blank document. If it changes to “the”, AutoCorrect works and the problem is in your original document.
  • Look at the status bar at the bottom of Word. Check which language it shows. If it is not your language, that is a strong clue.
  • Type a word with two capital letters at the start, such as “THe”. If Word leaves it alone, the main AutoCorrect switch is probably off.
  • Try the same test in a different Office app, such as Outlook. If AutoCorrect works there, the problem is limited to Word.
  • Check whether the problem affects all documents or just one. One document points to a document setting. All documents point to a Word setting.
  • Restart Word once. A stuck Word session can stop AutoCorrect until the app is closed and opened again.

Diagnosing the Problem

SymptomCauseGo to Fix
Nothing is corrected in any documentReplace text as you type is offFix 1
Corrections fail only in one documentDocument language or exception settingFix 2, Fix 7
Red underlines appear but no auto-fixSpelling suggestions are offFix 3
One word keeps changing wronglyBad AutoCorrect entryFix 4
Capitals and fractions are not fixedAutoFormat As You Type is offFix 5
AutoCorrect works in a new documentProblem is in the old documentFix 6
AutoCorrect stopped after new softwareAdd-in conflictFix 8
Nothing above helpsDamaged or outdated Office installFix 9

Fix 1: Turn On Replace Text as You Type

This is the main AutoCorrect switch. When it is off, microsoft word autocorrect not working is exactly what you get, in every document. Turn it back on and most cases are fixed on the spot.

The AutoCorrect Options dialog in Word with Replace text as you type
The AutoCorrect Options dialog holds the main switch for automatic corrections.
  1. In Word, go to File > Options.
  2. Click Proofing on the left side.
  3. Click the AutoCorrect Options button.
  4. On the AutoCorrect tab, tick Replace text as you type.
  5. Click OK twice to close both dialogs, then type “teh” followed by a space to test it.

If the box was already ticked, untick it, click OK, then open the dialog again and tick it. This forces Word to reload the setting. Microsoft’s official guide to AutoCorrect options describes each checkbox in this dialog, so you can check what the others do while you are there.

Fix 2: Check the Proofing Language

If the language is wrong, AutoCorrect checks your words against the wrong dictionary. This fix takes seconds, and it matters most for documents you did not create yourself.

Word proofing language settings showing English as the selected language
A wrong proofing language makes AutoCorrect check your words against the wrong dictionary.
  1. Select all the text with Ctrl + A.
  2. Go to the Review tab and click Language > Set Proofing Language.
  3. Choose your language, such as English (United States) or English (United Kingdom).
  4. Untick Do not check spelling or grammar if it is ticked.
  5. Click OK, then type a test word to see if corrections return.

Also check the language shown in the status bar at the bottom of the Word window. Click it to open the same language dialog quickly. If the language keeps changing back, the document may have different languages set on different paragraphs, so select all the text first, as above, before you change it.

Fix 3: Turn On Spelling Checker Suggestions

AutoCorrect uses the spelling checker to suggest fixes for misspelled words. If that link is broken, corrections stop even though the main switch is on.

  1. Go to File > Options > Proofing.
  2. Tick Check spelling as you type.
  3. Click AutoCorrect Options.
  4. Tick Automatically use suggestions from the spelling checker.
  5. Click OK twice, then test with a misspelled word.

While you are in the Proofing options, check that Mark grammar errors as you type is ticked too, if you want grammar fixes. If microsoft word autocorrect not working persists after this fix, the cause is likely a bad entry or an add-in, so keep going to the next fixes.

Fix 4: Clear a Bad AutoCorrect Entry

A wrong entry in the AutoCorrect list can make it look as if the feature is broken. One bad pair is enough. For example, an entry that replaces a correct word with a misspelling will undo your typing again and again.

  1. Go to File > Options > Proofing > AutoCorrect Options.
  2. In the Replace box, type the word that keeps changing wrongly.
  3. If an entry appears in the list below, select it.
  4. Click Delete to remove it.
  5. Click OK twice and test the word again.

You can also add your own entries here. Type a word you often misspell in Replace, type the correct word in With, and click Add. That turns a weakness into a shortcut. Microsoft’s guide to AutoCorrect emojis shows the same dialog and the same Replace text as you type checkbox, which is useful if punctuation is also changing oddly.

Fix 5: Check AutoFormat As You Type

Some corrections do not come from the AutoCorrect tab at all. Capitalising the first letter of a sentence, fixing two initial capitals, and turning fractions such as 1/2 into ½ are handled by AutoFormat As You Type. If only these fixes are missing, this is your fix.

  1. Go to File > Options > Proofing > AutoCorrect Options.
  2. Click the AutoFormat As You Type tab.
  3. Tick Capitalize first letter of sentences.
  4. Tick Correct accidental usage of cAPS LOCK key.
  5. Tick Replace under Replace as you type for fractions, then click OK twice.

Test each one. Type a lower-case letter at the start of a sentence, press space, and watch it capitalise. If it works, you have found the gap. If your spelling checker itself is acting up in a related way, our guide to Microsoft Word spell check language problems covers the language side in more depth.

Fix 6: Test in a New Blank Document

This fix does not change anything. It tells you where the problem lives. If AutoCorrect works in a new document, your original document has a setting that blocks it, and repairing Word will not help.

A fresh blank Word document used to test whether AutoCorrect works
A blank document test shows whether the problem is in Word or in one file.
  1. Press Ctrl + N to open a new blank document.
  2. Type “teh” followed by a space.
  3. If it changes to “the”, the problem is in your original document.
  4. Go back to the original, press Ctrl + A, and set the proofing language again as in Fix 2.
  5. Check the original document for pasted text marked Do not check spelling or grammar.

If AutoCorrect fails in the new document too, the problem is in Word itself, so move on to the add-in and repair fixes below. This test saves time because it stops you from reinstalling Office to fix a single document.

Fix 7: Check Exceptions for This Document

Word lets you set exceptions that apply to one document only. An exception can tell Word to skip AutoCorrect for certain words, or to skip it entirely for the file. These exceptions are easy to miss because they sit in the same dialog as the main settings.

  1. Go to File > Options > Proofing > AutoCorrect Options.
  2. Click the AutoCorrect tab and look at the Exceptions button.
  3. Click Exceptions and check the First Letter and INitial CAps tabs for words you need corrected.
  4. Remove any exception that blocks a word you type often.
  5. Click OK on each dialog, then test again.

Also check the document itself for protection. Go to Review > Restrict Editing. If editing is restricted, AutoCorrect may be limited too. Our guide on Microsoft Word cannot edit document explains how to lift those restrictions step by step.

Fix 8: Disable Conflicting Add-ins

Add-ins load when Word starts, and a faulty one can block AutoCorrect. The fastest way to test this is Safe Mode, which starts Word with no add-ins at all.

  1. Close Word completely.
  2. Hold Ctrl and click the Word icon to start Word in Safe Mode, then click Yes.
  3. Type “teh” followed by a space in a blank document.
  4. If AutoCorrect works now, an add-in is the cause.
  5. Close Safe Mode, open Word normally, and go to File > Options > Add-ins.

In the Add-ins screen, choose COM Add-ins in the Manage box and click Go. Untick the add-ins one at a time, restarting Word after each one, until AutoCorrect returns. Grammar checkers and clipboard tools are the most common culprits. Remove or update the faulty add-in, and leave the rest alone.

Fix 9: Update and Repair Office

If every other fix has failed, the Office installation itself may be damaged. An update fixes known bugs, and a repair replaces damaged files. Do the update first, because it is quicker.

Windows Installed apps screen with Microsoft 365 selected for repair
The Office repair tool replaces damaged program files without touching your documents.
  1. In Word, go to File > Account > Update Options > Update Now.
  2. Wait for the update to finish, then restart Word and test AutoCorrect.
  3. If it still fails, close all Office apps.
  4. Right-click the Start button and choose Installed apps.
  5. Find Microsoft 365 or Microsoft Office, click the three dots, choose Modify, then pick Quick Repair and click Repair.

Quick Repair works offline and takes a few minutes. If it does not help, repeat the steps and choose Online Repair, which downloads fresh files and takes longer. After the repair, open Word and test with “teh” again. If Word itself will not start at all during this process, our Microsoft Word not responding guide covers that problem. If typing in Word feels broken more widely, the find and replace guide may also help, since both features share the same proofing engine.

Fix 10: Rename the Normal Template (Normal.dotm)

Word stores your default settings, styles, and AutoCorrect behaviour in a template file called Normal.dotm. If that template is damaged, microsoft word autocorrect not working can affect every new document, even though every setting in Fix 1 looks correct. Renaming the file forces Word to build a fresh one.

  1. Close Word completely.
  2. Press Windows key + R, type %appdata%\Microsoft\Templates, and press Enter.
  3. Find the file named Normal.dotm, right-click it, and choose Rename.
  4. Change the name to Normal-old.dotm and press Enter.
  5. Open Word again and type “teh” followed by a space to test AutoCorrect.

Word creates a new Normal.dotm the moment it starts. Your documents are not touched, and only your default settings are reset. If AutoCorrect works again, the old template was damaged, and you can delete Normal-old.dotm. If you had custom styles or macros saved in the old template, they stay in Normal-old.dotm, so keep it until you are sure you do not need them.

Fix 11: Delete the Corrupted AutoCorrect List File

Fix 4 removes one bad entry from the AutoCorrect list. If the whole list is damaged, removing entries one by one will not help. Word stores the list in a small file ending in .acl, and deleting that file forces Word to build a fresh, empty list.

  1. Close Word completely.
  2. Press Windows key + R, type %appdata%\Microsoft\Office, and press Enter.
  3. Look for files ending in .acl, such as MSO1033.acl for English (United States) or MSO2057.acl for English (United Kingdom).
  4. Move the matching .acl file to your Desktop, so you have a backup.
  5. Open Word and type “teh” followed by a space to test AutoCorrect.

If AutoCorrect returns, the old list file was corrupted. Word builds a new list as you type, but any custom entries you added to the old list are gone with it, so re-add the ones you need using the method in Fix 4. If the file on your Desktop turns out not to be the cause, you can move it back while Word is closed.

What to Avoid

  • Do not reinstall Office before trying the settings fixes. Reinstalling takes far longer and rarely fixes a switched-off checkbox.
  • Do not download “AutoCorrect fixer” tools from random websites. They are not needed, and some carry malware.
  • Do not turn off spellcheck entirely to hide the problem. That leaves real typos in your documents.
  • Do not edit the AutoCorrect list file by hand in File Explorer. Use the dialog in Fix 4, or you can corrupt the list.
  • Do not assume the document is at fault. Test in a new blank document first, as in Fix 6.
  • Do not ignore the proofing language. A document in the wrong language will defeat every other fix.

Frequently Asked Questions

Why did AutoCorrect stop working all of a sudden?

The most common reason is a settings change. An Office update, a new user profile, or a shared computer can switch off Replace text as you type or change the proofing language. Start with Fix 1 and Fix 2, since those two cover most sudden failures.

Does AutoCorrect work in Word for the web?

Word for the web has basic AutoCorrect, but it is not as full as the desktop app. Some options, such as custom AutoCorrect entries, do not carry over. If you need the full feature, use the desktop version of Word.

Why does AutoCorrect fix some words but not others?

That usually means a bad entry, an exception, or a language mismatch on part of the text. Check the AutoCorrect list for the words that fail, as in Fix 4, and check the proofing language of the exact paragraph, as in Fix 2.

Can an add-in really turn off AutoCorrect?

Yes. Add-ins can intercept keystrokes before Word processes them. Grammar tools and clipboard managers are the usual suspects. Safe Mode, as in Fix 8, proves it in under a minute.

Will repairing Office delete my documents?

No. A repair only fixes the Office program files. Your documents, templates, and AutoCorrect entries stay where they are. Still, keep a backup of important documents before any repair, just as good practice.

Conclusion

When microsoft word autocorrect not working interrupts your writing, the cause is usually small: a switched-off checkbox, a wrong language, or a bad list entry. Work through the 11 fixes in order, starting with Replace text as you type and the proofing language, and test with a simple word such as “teh” after each step. Most readers will be fixed by Fix 1 or Fix 2.

If you reach the repair stage, remember that Quick Repair is fast and safe, and Online Repair is the deeper option. Once AutoCorrect is back, add your own frequent typos to the list in Fix 4, so Word starts working for you instead of against you. Your documents will look cleaner, and you will spend less time proofreading for mistakes Word can catch on its own.

Leave a Reply

Your email address will not be published. Required fields are marked *