
The document looks perfect on screen. You print it, and the last letters of every line are missing, or the top of the first line is sliced off. When microsoft word printing cut off text ruins a document you need to hand in, the cause is almost never a broken printer. It is a mismatch: Word thinks the paper is one size, the printer thinks it is another, or the margins sit outside the area the printer can reach.
Every printer has an unprintable edge, a narrow border around the paper where it physically cannot print. Word does not always know where that border is. If your margins, headers, or paper size push text into that border, the printer simply leaves it out, with no warning. This guide works through the mismatches in order, from the quick print preview check to the deeper fixes. Nothing here deletes your document, and every fix can be tested with a single page before you print the whole file.
Table of Contents
- Why This Error Happens
- Quick Checks
- Diagnosing the Problem
- Fix 1: Check Print Preview and Print One Test Page
- Fix 2: Fix Margins So Text Stays Inside the Printable Area
- Fix 3: Match Paper Size in Word and in the Printer Tray
- Fix 4: Check Printer Properties, Scaling, and Fit to Page
- Fix 5: Fix Headers, Footers, and Text That Sits Too High or Low
- Fix 6: Fix Tables, Text Boxes, and Images That Extend Past the Margin
- Fix 7: Turn On Scale Content for A4 or Letter Size
- Fix 8: Update or Reinstall the Printer Driver
- Fix 9: Test by Printing to PDF and on Another Printer
- Fix 10: Repair Office and Update Word
- Fix 11: Test a New Document and Reset the Default Template
- What to Avoid
- Frequently Asked Questions
- Conclusion
- Helpful Official Resources
Why This Error Happens
Printing is a handover between three things: Word’s page layout, the printer driver’s settings, and the physical paper in the tray. If any of the three disagrees with the others, text at the edges is the first casualty. These are the reasons that cause it most often.
1. Margins Are Smaller Than the Printer Can Handle
Every printer has a minimum margin, usually around a quarter of an inch or a few millimetres, where it cannot print. If Word’s margins are set smaller than that, text in the margin area is cut off. Narrow and custom margins are the usual trigger. The document looks fine on screen because the screen has no unprintable edge.
2. Paper Size in Word Does Not Match Paper in the Tray
Word formats the document for one paper size, such as A4, while the tray holds another, such as Letter. The printer then prints an A4 layout onto Letter paper, or scales it awkwardly, and text near the edges disappears. This mismatch is common when a document comes from another country, or when the printer driver defaults to a different size from Word.
3. Printer Scaling or Fit to Page Is Set Wrong
Printer drivers offer scaling options: print at 100 percent, fit to page, or shrink to fit. A driver set to print at a fixed size larger than the paper, or with fit-to-page turned off, will cut off text that Word placed correctly. The same document can print fine from one computer and cut off from another, purely because the driver settings differ.
4. Headers, Footers, or Text Boxes Sit Outside the Printable Area
Headers and footers have their own distance from the edge of the page, separate from the margins. If that distance is too small, the header or footer is cut off even when the body text prints fine. Text boxes, tables, and images that extend past the margin are cut the same way. The body of the document can look perfect while the edges lose content.
5. The Printer Driver Is Outdated or Using a Generic Driver
The driver tells Word how much of the page the printer can reach. An outdated or generic driver can report the wrong printable area, so Word allows text in places the printer cannot reach. A driver that worked for years can become wrong after a Windows update changes how it reports the printable area.
6. The Document or the Default Template Carries a Bad Setting
A document created on another computer, or from a template with unusual page setup, can carry margins, paper size, or section settings that do not suit your printer. The default Word template can carry a bad setting too, in which case every new document prints cut off. This cause explains microsoft word printing cut off text that affects every document, not just one file.
Quick Checks
Two minutes before the deep fixes.
- Open Print Preview with Ctrl+P and look at the edges — is text already cut off in the preview?
- Check the paper in the tray — is it A4, Letter, or something else, and does Word say the same size?
- Look at which edge loses text — left and right edges point to margins or paper width, top and bottom to headers or paper length.
- Print one page only, not the whole document, while you test.
- Think about when it started — did microsoft word printing cut off text begin with a new printer, a new document, or an update?
- Try printing the same document from another program, such as a PDF reader — if that also cuts off, the printer settings are the cause.
Diagnosing the Problem
| Symptom | Cause | Go to Fix |
|---|---|---|
| Text cut in Print Preview too | Margins or paper size in Word | Fix 2 |
| Only left and right edges cut | Margins too narrow or wrong paper width | Fix 2 |
| Only top or bottom cut | Header or footer too close to edge | Fix 5 |
| Cut off on one printer only | Printer driver or scaling setting | Fix 4 |
| Cut off in Word, fine as PDF | Word page setup or driver mismatch | Fix 9 |
| Tables or pictures cut at edges | Object extends past the margin | Fix 6 |
| Every document cuts off | Default template or driver fault | Fix 11 |
| Cut off after a Windows update | Outdated printer driver | Fix 8 |
Fix 1: Check Print Preview and Print One Test Page
Print Preview shows what the printer will do, using the selected printer’s settings. If text is cut off in the preview, the problem is in the document or driver settings, and you can fix it without wasting paper. Always test with one page.
- Press Ctrl+P to open the print view.
- Look at the preview page carefully, especially the left, right, top, and bottom edges.
- Check the printer name at the top. Make sure it is the printer you intend to use, not a PDF printer or an old printer.
- Check the paper size shown in the print settings. It should match the paper in the tray.
- Set the page range to print one page only, such as page 1, for the test.
- Print that single page and compare it with the preview.
- If the preview is fine but the printed page is cut off, the driver or the physical paper is the cause. Move to Fix 4.
The preview is honest, but only for the selected printer. Changing the printer in the print view can change the preview, because each printer reports a different printable area. If you switch printers, look at the preview again before printing. A document that previews fine on one printer can preview cut off on another, and that difference is real information about the printers, not a Word fault.
Keep a test page habit for important documents. One page costs little, and it catches margin, paper, and scaling problems before you print twenty copies. For a long document, test the first page and one page from the middle, because section breaks can give different pages different margins or paper sizes, as Fix 6 explains.
Fix 2: Fix Margins So Text Stays Inside the Printable Area
Margins that are too narrow are the most common cause of cut-off text. Widening them by a small amount usually fixes the problem completely, and the document still looks good.
- Open the Layout tab in Word and click Margins.
- Note the current setting. If it is Narrow or a custom setting under 1.27 cm or 0.5 inches, it is likely too narrow for your printer.
- Choose Normal, which sets all margins to 2.54 cm or 1 inch, for this test.
- Press Ctrl+P and check the preview. The cut-off text should now be inside the page.
- Print one test page and confirm the edges print fully.
- If Normal margins fix it, you can narrow them gradually. Try Custom Margins at 1.9 cm or 0.75 inches, test, then 1.27 cm or 0.5 inches, testing each time.
- Stop narrowing at the smallest margin that still prints fully. That is your printer’s real limit.
Do not fight the printer’s physical limit. If text cuts off at 0.5-inch margins but prints fine at 0.75 inches, your printer simply cannot print closer to the edge, and no Word setting will change that. The only way to print closer is a printer with borderless printing, which most office printers do not offer for ordinary documents. Accepting the limit saves paper and frustration.
Word may warn you when margins are outside the printable area. If you see a warning that margins are set outside the printable area of the page, take it seriously. Click Fix to let Word adjust the margins to the printable area, then test. Ignoring the warning and printing anyway is how text gets cut off. That warning is Word telling you, in advance, exactly what will happen.
Fix 3: Match Paper Size in Word and in the Printer Tray
A paper size mismatch is the second most common cause, and it is easy to miss because Word and the printer each have their own paper size setting. Both must agree, and both must match the physical paper.

- Open the Layout tab, click Size, and note the paper size Word is using, such as A4 or Letter.
- Open the paper tray and check the physical paper. Look at the packaging or measure it if you are unsure.
- If Word says A4 and the tray holds Letter, or the reverse, change one to match the other.
- To change Word, use Layout, then Size, and choose the size that matches the tray.
- Open the printer properties from the print view, and check the paper size there too. Change it to match.
- Press Ctrl+P, check the preview, and print one test page.
- If you receive documents from another country, check the paper size every time. A4 and Letter look similar but differ enough to cut off text.
A4 and Letter are the usual pair in conflict. A4 is slightly narrower and longer than Letter. A document formatted for A4 and printed on Letter loses text at the bottom or sides, depending on how the driver handles the difference. The reverse loses text at the other edges. The fix is always the same: make all three agree, Word, driver, and tray.
Also check for mixed paper sizes inside one document. Section breaks can change paper size partway through a document, so the first pages print fine and later pages cut off. If only some pages cut off, click into a cut-off page, open Layout, then Size, and check whether that section uses a different size. Fix the section, or remove the section break if it serves no purpose. For documents whose layout shifts unexpectedly, our guide to Microsoft Word document formatting changes covers formatting that moves on its own.
Fix 4: Check Printer Properties, Scaling, and Fit to Page
The printer driver has its own scaling and paper settings, separate from Word. A driver set to print at more than 100 percent, or with fit-to-page turned off, will cut off text that Word placed correctly.
- Press Ctrl+P to open the print view.
- Click Printer Properties below the printer name.
- Look for a paper size, scaling, or page setup tab. The layout varies by printer maker.
- Set the paper size to match the tray, as in Fix 3.
- Find the scaling option. Set it to 100 percent, or turn on “Fit to page” or “Shrink to fit” if the driver offers it.
- Click OK, check the preview in Word, and print one test page.
- If the driver has a “borderless” option, do not turn it on for ordinary documents unless your printer supports it. Borderless printing uses different paper handling and can make the problem worse.
Fit to page is a useful safety net. It shrinks the document slightly so the whole page fits inside the printable area. The shrinkage is usually too small to notice, and it guarantees nothing is cut off. Use it for documents you must print as they are, such as forms or documents from other people, where changing margins is not appropriate. For your own documents, fixing the margins in Fix 2 is cleaner than relying on fit to page every time.
Driver settings can be sticky. A scaling setting changed for one print job can stay set for the next, because some drivers remember the last used settings. If a document that printed fine yesterday cuts off today, check the driver scaling before you blame Word. A driver reset, or closing and reopening Word, often restores the defaults.
Fix 5: Fix Headers, Footers, and Text That Sits Too High or Low
Headers and footers have their own distance from the edge, separate from the top and bottom margins. If that distance is too small, the header or footer is cut off while the body text prints fine. This fix addresses top and bottom cut-offs specifically.
- Double-click the header area at the top of a page to open the header.
- Open the Layout tab, or the Header and Footer tab, and look for the header distance setting.
- Increase the header distance from the edge to at least 1.27 cm or 0.5 inches.
- Do the same for the footer distance at the bottom of the page.
- Alternatively, open Layout, then Page Setup, then the Layout tab, and set the header and footer distances there.
- Press Ctrl+P and check whether the header and footer now appear in the preview.
- Print one test page and confirm the top and bottom lines print fully.
Header and footer distance is measured from the edge of the paper, not from the margin. A header distance of zero places the header at the very edge, where no printer can reach. The setting is easy to change by accident when dragging the header boundary on screen, or when a template sets it unusually small. Increasing it by a few millimetres is usually enough.
Also check for text with a line spacing or paragraph spacing setting that pushes the first line of a page too high. A paragraph with a large space-before value at the top of a page can push its first line into the unprintable area. If only the first line of certain pages is cut, check the paragraph spacing for those paragraphs. Our guide to Microsoft Word header and footer missing covers headers and footers that vanish entirely, which can share the same page setup causes.
Fix 6: Fix Tables, Text Boxes, and Images That Extend Past the Margin
Objects in a document, such as tables, text boxes, shapes, and images, can extend past the margin even when the body text stays inside it. The printer cuts off whatever lies outside the printable area, whether it is text or an object.
- Turn on formatting marks with Ctrl+Shift+8, so you can see paragraph marks and object boundaries more clearly.
- Look for tables, text boxes, or images that touch or cross the right or left edge of the page in Print Layout view.
- Click a table that extends past the margin, open the Layout tab for tables, and choose AutoFit, then AutoFit to Window, or set the table width to fit inside the margins.
- For a text box or shape, drag its edge inside the margin, or right-click it, choose Format, and set an exact position and size inside the printable area.
- For an image, drag a corner handle to shrink it, keeping its proportions, until it sits inside the margins.
- Press Ctrl+P and check the preview for each affected page.
- Print one test page, and check tables on later pages too, because a wide table can repeat on several pages.
Tables are the most common offender. A table created with fixed column widths that total more than the text width will push its last column off the page. AutoFit to Window fixes it in one step for most tables. If a table must stay wide, switch that section to landscape orientation, or reduce the font size inside the table, rather than letting a column fall off the edge.
Text boxes deserve suspicion when text is cut off in a specific spot on every page, such as a sidebar or a callout box. A text box positioned with a negative indent, or anchored to a paragraph that moved, can drift off the page. Selecting the box and checking its position settings shows where Word thinks it is. If the position numbers look wrong, reset them to sit inside the margins. For wider table trouble, our guide to Microsoft Word table formatting problem covers tables that resize or misbehave.
Fix 7: Turn On Scale Content for A4 or Letter Size
Word has a built-in option that automatically scales content when the paper size changes between A4 and Letter. It is designed for exactly the cross-country mismatch in Fix 3, and it can save a document you cannot reformat by hand.

- Click File, then Options, then Advanced.
- Scroll to the Print section.
- Tick “Scale content for A4 or Letter paper sizes”.
- Click OK.
- Press Ctrl+P and check the preview. The document should now fit the paper in the tray.
- Print one test page and confirm no text is cut off.
- If the document still cuts off, the mismatch is not A4 versus Letter. Return to Fixes 2 and 3.
This option only helps with the A4 and Letter pair. It does nothing for other paper sizes, and it does nothing if the paper in the tray is neither A4 nor Letter. It is a safety net for documents that travel between countries, not a general fix. For your own documents, matching the paper size properly in Fix 3 is better, because scaling changes the apparent size of the text slightly.
The option lives in Word’s global settings, not in the document, so it applies to every document you print from that copy of Word. That is usually what you want. If you share the document with someone else, their copy of Word may not have the option on, so the document can still cut off on their printer. For shared documents, fixing the paper size in the document itself is the reliable answer.
Fix 8: Update or Reinstall the Printer Driver
The driver tells Word the printable area. An outdated, generic, or damaged driver can report the wrong area, so Word places text where the printer cannot reach. Updating the driver from the printer maker’s official site fixes the report.
- Note your printer’s exact model name from the front of the printer or from Windows Settings, then Bluetooth and devices, then Printers and scanners.
- Go to the printer maker’s official support website and search for your model.
- Download the latest driver for your version of Windows. Do not use a driver updater tool or an unfamiliar download site.
- Install the driver following the maker’s instructions, and restart the computer if asked.
- Open Word, press Ctrl+P, select the printer, and check the preview.
- Print one test page.
- If updating does not help, remove the printer in Windows Settings, restart, and add it again with the fresh driver.
Generic drivers are a common hidden cause. Windows can install a basic driver that prints, but reports a generic printable area that does not match your printer. The maker’s own driver reports the correct area. If your printer shows as a generic model in Windows Settings, or the driver date is very old, the maker’s driver is worth installing even if printing “mostly works”.
A driver problem has a tell-tale sign: microsoft word printing cut off text that appears after a Windows update, or that affects every program, not just Word. If web pages and PDFs also cut off, the driver or the printer settings are the cause, and Word settings alone cannot fix it. In that case, the driver update and the printer properties check in Fix 4 are the fixes that matter. For printers that Windows cannot see at all, our guide to Windows 11 printer not detected covers detection and connection problems.
Fix 9: Test by Printing to PDF and on Another Printer
A PDF test splits the problem cleanly in half. If the PDF shows the text cut off, the problem is in Word’s page setup. If the PDF is fine but the paper print cuts off, the problem is in the printer, its driver, or the paper. An another-printer test does the same job from the other side.
- Press Ctrl+P and choose Microsoft Print to PDF as the printer.
- Print the document to a PDF file.
- Open the PDF and check the edges. Note whether text is cut off in the PDF.
- If the PDF is cut off, the cause is in Word. Return to Fixes 2, 3, 5, and 6.
- If the PDF is fine, print the PDF file itself on the physical printer from a PDF reader.
- If the PDF prints fine from the reader but the Word document cuts off, the Word printer driver settings are the cause. Recheck Fix 4.
- If you have access to another printer, print the Word document there. A clean print on the second printer proves the first printer’s settings or driver are at fault.
The PDF test also gives you a workaround for urgent documents. If the PDF is fine, you can print the PDF instead of the Word file and hand in a clean copy while you fix the Word settings at leisure. That workaround is legitimate and often the fastest path when a deadline is close. It does not fix the underlying mismatch, but it gets a correct printout in your hands.
Keep the PDF test honest by using the same paper size in the PDF as in the tray. Printing to PDF with a different paper size than the physical paper recreates the mismatch in a new form. Set the paper size in the print view before creating the PDF, and check the PDF page size in the reader before you judge the result.
Fix 10: Repair Office and Update Word
If Word itself has damaged files, its print preview and page setup can misbehave in ways no setting can fix. An Office repair replaces damaged program files without touching your documents. An update fixes known printing bugs.
- Save and close all Office documents.
- Open Windows Settings, then Apps, then Installed apps.
- Find Microsoft 365 or Microsoft Office in the list, click the three-dot menu, and choose Modify.
- Choose Quick Repair and follow the prompts. This is fast and works offline.
- Test printing one page from Word after the repair.
- If Quick Repair does not help, repeat the steps and choose Online Repair, which downloads fresh files and takes longer.
- After the repair, open Word, click File, then Account, then Update Options, and install any Office updates. Restart Word and test again.
Quick Repair first, Online Repair second. Quick Repair fixes most damaged-file problems in minutes. Online Repair is the heavier tool, and it needs a reliable internet connection. Neither repair deletes your documents, templates, or settings, though Online Repair can reset some Office settings to defaults. Note down any unusual Office settings you rely on before running Online Repair, just in case.
An update matters because printing bugs are fixed in Office updates, including bugs in how Word reports page size to certain drivers. If printing broke after an Office update, a newer update may already fix it, so checking for updates is worth doing even when the problem seems to have started with an update. If Word will not update, check your internet connection and whether a work policy controls Office updates.
Fix 11: Test a New Document and Reset the Default Template
The final test separates a bad document from a bad Word setup. If a brand-new document prints fine, the original document carries the bad setting. If every new document cuts off, the default template or the Word installation carries it.
- Create a new blank document in Word.
- Type several lines of text that reach the left and right margins, and add a header with text.
- Press Ctrl+P, check the preview, and print one page.
- If the new document prints fine, the original document is the problem. Copy its content into a new document using Paste Special, keeping text only, then reapply formatting, or fix its page setup with Fixes 2 and 3.
- If the new document also cuts off, the default template may be damaged. Close Word completely.
- Find the Normal template file. In File Explorer, go to the Templates folder in your user profile, and rename Normal.dotm to Normal-old.dotm. Word creates a fresh default template next time it opens.
- Reopen Word, create a new document, and test printing again.
Renaming the template is safe because Word rebuilds it. Your documents are not stored in the template, though custom styles, macros, and default settings stored in the template will reset to Word’s defaults. Keep the renamed old file until you are sure the fresh template fixed the problem and you do not need anything from the old one. If you use custom macros or a heavily customised default template, back it up before renaming, or ask someone comfortable with Word templates to help.
If a fresh template and a fresh document still cut off, and the driver and paper size are correct, the cause is in the printer itself: its firmware, its paper guides, or a hardware fault in paper feeding. Check the paper guides in the tray are snug against the paper, not loose, because skewed paper loses text at one edge. A printer that feeds paper crookedly needs cleaning or service, and no Word setting will compensate for it.


What to Avoid
- Do not set margins below your printer’s printable area — Word’s warning about margins outside the printable area means text will be lost.
- Do not ignore a paper size mismatch — A4 and Letter look alike but differ enough to cut off text.
- Do not download printer drivers from driver-updater tools or unfamiliar sites — use the printer maker’s official support page.
- Do not print the whole document while testing — one test page catches the problem without wasting paper.
- Do not turn on borderless printing for ordinary documents unless your printer supports it — it uses different paper handling.
- Do not delete the default Word template without renaming it first — renaming lets Word rebuild it and keeps a fallback.
- Do not assume the printer is broken — a mismatch in Word or the driver is far more likely than a hardware fault.
Frequently Asked Questions
Why is Word cutting off text when printing but not on screen?
The screen has no unprintable edge, but every printer does. microsoft word printing cut off text happens when margins, headers, or paper size push text into the border the printer cannot reach. The text exists in the document, and it shows on screen, but the printer physically cannot print there. Widen the margins or match the paper size, as in Fixes 2 and 3.
Why is only the right edge cut off when printing from Word?
A right-edge cut usually means the paper is narrower than Word expects, the right margin is too small, or a table or text box extends past the right margin. Check the paper size in Word and in the tray first, then the margins, then any wide table, as in Fixes 2, 3, and 6.
Why is the top of the page cut off when printing?
The header distance or the top margin is too small for the printer. Increase the header distance to at least 1.27 cm or 0.5 inches, as in Fix 5, and check the top margin. A first line pushed too high by paragraph spacing can also be cut, so check the spacing of the first paragraph on the page.
Does printing to PDF fix cut-off text in Word?
Printing to PDF does not fix the Word settings, but it tells you where the problem lives. If the PDF is cut off, the problem is in Word’s page setup. If the PDF is fine, the problem is in the printer or driver. A clean PDF can also be printed directly as a workaround while you fix the settings, as in Fix 9.
Should I use Fit to Page to stop text being cut off?
Fit to page is a good safety net for documents you cannot reformat, such as forms from other people. It shrinks the page slightly so everything fits. For your own documents, fixing margins and paper size is cleaner, because fit to page changes the size of the text slightly on every print.
Why does every Word document print cut off, not just one?
When every document cuts off, the cause is shared: the default template, the printer driver, or the paper size setting. Test a new blank document, as in Fix 11, update the driver, as in Fix 8, and check the paper size in the tray. A fault that affects all documents is rarely in one file.
Conclusion
When microsoft word printing cut off text at the edges, the answer is almost always a mismatch, not a broken printer. Margins smaller than the printable area, paper size disagreement between Word, the driver, and the tray, or scaling set wrong in the driver account for most cases. Work through the fixes in order, test with one page at a time, and use the PDF test to split Word causes from printer causes. Once Word, the driver, and the paper all agree, every word prints, right to the edge of what the printer can reach.
