
You switch on the PC, reach the sign-in screen, and the PIN box is gone — replaced by a message that the PIN is unavailable. When windows 11 pin sign-in unavailable appears, the quick sign-in you use every day stops working, and it feels as if you are locked out. You are not: your account, your files, and your password are all still there.
The PIN is a convenience that sits on top of your account, and it can almost always be rebuilt safely. This guide works through the causes in order, from a simple restart to rebuilding the stored PIN data. Nothing here deletes your account or your files. Work through the fixes one at a time, and test the sign-in screen after each one.
Table of Contents
- Why This Error Happens
- Quick Checks
- Diagnosing the Problem
- Fix 1: Restart the PC and Try the PIN Again
- Fix 2: Sign In With Your Password Instead
- Fix 3: Remove the PIN and Add a Fresh One
- Fix 4: Clear the Old PIN Data From the NGC Folder
- Fix 5: Update Windows and the Device Drivers
- Fix 6: Run SFC and DISM to Repair System Files
- Fix 7: Reset the PIN From the Lock Screen
- Fix 8: Check the Account Settings and Microsoft Account Sync
- Fix 9: Boot Into Safe Mode and Repair the Sign-In Options
- Fix 10: Create a New Local Administrator Account
- Fix 11: Reset Windows While Keeping Your Files
- What to Avoid
- Frequently Asked Questions
- Conclusion
- Helpful Official Resources
Why This Error Happens
A PIN is not stored as plain numbers. Windows turns your PIN into protected sign-in data held in a secure folder, and Windows Hello checks that data each time you sign in. If the data is damaged, if a service that checks it fails, or if an update changes the rules, Windows hides the PIN option and shows the “unavailable” message instead. These are the reasons that happens most often.
1. The Stored PIN Data Is Damaged
Your PIN data lives in a protected folder called NGC. If that folder’s contents are damaged by a disk error, a sudden shutdown, or a failed update, Windows cannot read the PIN, so it marks the PIN as unavailable rather than risk accepting a wrong one. The account itself is untouched — only the stored PIN data needs rebuilding, which is exactly what Fixes 3 and 4 do.
2. A Windows Update Changed the Sign-In Rules
Updates sometimes change how Windows Hello handles sign-in, or they reset the setting that requires Windows Hello sign-in for Microsoft accounts. After such an update, the old PIN data may no longer match the new rules, and Windows reports the PIN as unavailable until you set it up again. This explains why windows 11 pin sign-in unavailable often appears the morning after an update installed overnight.
3. The TPM or a Sign-In Service Is Not Ready
The Trusted Platform Module, or TPM, is a security chip that protects your PIN data. If the TPM is not ready, or if a sign-in service fails to start, Windows cannot verify the PIN and hides the option. A restart usually brings the TPM and services back, which is why Fix 1 works more often than people expect. A TPM that stays unready after restarts needs the driver and update checks in Fix 5.
4. The Microsoft Account Link Broke
If you sign in with a Microsoft account, Windows checks that account online from time to time. A changed password, a security hold, or a sync problem can break the link between the online account and the local PIN. Windows then refuses the PIN until the account link is repaired, even though the PIN itself is fine. Fix 8 covers the account checks that restore the link.
5. Damaged System Files Are Blocking Sign-In
The sign-in screen depends on shared Windows files and services. If those files are damaged by a disk error or an interrupted update, the PIN option can fail while password sign-in still works. Password sign-in uses a simpler path, so it often survives damage that breaks the PIN. The file repair in Fix 6 exists for exactly this situation.
6. A Conflicting Setting or Program Is Interfering
Some workplace policies, security programs, and tuning tools change sign-in settings — for example, turning off Windows Hello or changing which sign-in methods are allowed. A setting changed by another program can hide the PIN option even though the PIN data is healthy. The Safe Mode test in Fix 9 separates a settings conflict from a damaged PIN, because Safe Mode loads Windows without third-party programs.
Quick Checks
Two minutes before the deep fixes.
- Restart the PC once and look at the sign-in screen again — does the PIN box return?
- Click Sign-in options on the sign-in screen — is the password option still there?
- Check whether you know your account password — you will need it for several fixes.
- Check for pending Windows updates — open Settings, then Windows Update, after signing in.
- Think about when it started — did windows 11 pin sign-in unavailable begin after an update, a password change, or a new program?
- Do not use a “password recovery” tool from an unknown website — only the official steps in this guide are safe.
Diagnosing the Problem
| Symptom | Cause | Go to Fix |
|---|---|---|
| PIN box missing after a restart | Service or TPM not ready | Fix 1 |
| PIN unavailable but password works | Damaged PIN data | Fix 3 |
| PIN cannot be removed in Settings | Corrupted stored PIN data | Fix 4 |
| Problem started after a Windows update | Update changed sign-in rules | Fix 5 |
| Sign-in screen is slow or shows errors | Damaged system files | Fix 6 |
| PIN option missing at the lock screen | PIN needs a lock-screen reset | Fix 7 |
| Microsoft account shows a sync warning | Broken account link | Fix 8 |
| Problem follows one user account only | Damaged user profile | Fix 10 |
Fix 1: Restart the PC and Try the PIN Again
Start with a full restart, because the TPM chip and the sign-in services load at startup, and a service that missed its moment will often load cleanly the second time. Use Restart from the power menu on the sign-in screen itself — you do not need to sign in first.

- On the sign-in screen, click the power icon in the bottom-right corner.
- Choose Restart and wait for the PC to load the sign-in screen again.
- Give the PC one full minute after the sign-in screen appears.
- Look for the PIN box and try your PIN.
- If the PIN box is still missing, click Sign-in options to see all methods.
- Try the PIN once more after waiting another minute.
- If the PIN is still unavailable, move on to Fix 2 — the password will get you in.
A slow startup can delay the sign-in services, so the one-minute wait matters — the PIN box sometimes appears late on older PCs. Do not force the PC off with the power button during this test, because a forced shutdown can damage the very PIN data you are trying to fix. If the PC is also slow to start in general, our guide to Windows 11 slow startup fix covers startup speed. A PIN that returns after a restart but vanishes again the next day points to the stored-data fault in Fix 4.
Fix 2: Sign In With Your Password Instead
The password opens the same account as the PIN, and signing in with it proves the account is healthy. Once you are signed in, you can rebuild the PIN from Settings. This step is the doorway to nearly every other fix, so do not skip it.
- On the sign-in screen, click Sign-in options.
- Choose the password icon — it looks like a key.
- Type your account password carefully and press Enter.
- If the password is rejected, check Caps Lock and try again slowly.
- For a Microsoft account, use the password you use for Microsoft’s websites.
- Once signed in, open Settings and confirm your files and desktop look normal.
- Keep this signed-in session open — Fixes 3 to 6 all start from inside Windows.
If you have forgotten the password too, use the I forgot my password link on the sign-in screen, which verifies you through your email or phone. Never use a password-cracking tool from an unknown site: those tools can install malware and can damage the account beyond repair. A password that works proves the account is fine and the fault is limited to the PIN data or the sign-in services. If even the password fails, Fix 7 resets the PIN from the lock screen without needing to sign in first.
Fix 3: Remove the PIN and Add a Fresh One
Removing the PIN deletes the damaged stored data, and adding a fresh PIN writes clean data in its place. This is the most direct fix, and it works whenever the Settings page still lets you manage the PIN. You must be signed in with your password first, using Fix 2.
- Open Settings, then Accounts, then Sign-in options.
- Under PIN (Windows Hello), click Remove.
- Confirm the removal and enter your account password when asked.
- Restart the PC and sign in with your password.
- Return to Settings, then Accounts, then Sign-in options.
- Under PIN (Windows Hello), click Set up and follow the prompts.
- Choose a new PIN, restart once more, and test the PIN at the sign-in screen.
Use a PIN you will remember, and avoid obvious sequences such as four identical digits. If the Remove button is greyed out, the setting that requires Windows Hello sign-in may be blocking it — turn off For improved security, only allow Windows Hello sign-in for Microsoft accounts on the same page, then try again. If removal fails with an error, the stored data is too damaged for Settings to clear, and Fix 4 removes it directly. A fresh PIN that works immediately proves the old data was the whole problem.
Fix 4: Clear the Old PIN Data From the NGC Folder
When Settings cannot remove the PIN, the stored data in the NGC folder must be cleared by hand. This folder is protected, so you need administrator permission, and you must take ownership of the folder before Windows lets you clear it. Done carefully, this is safe — the folder only holds sign-in data, and Windows rebuilds it when you set up a new PIN.

- Sign in with your password and open File Explorer as an administrator.
- Go to
C:\Windows\ServiceProfiles\LocalService\AppData\Local\Microsoft\NGC. - If access is denied, right-click the NGC folder, choose Properties, then Security, then Advanced.
- Change the owner to your administrator account and grant yourself Full control.
- Delete everything inside the NGC folder, but do not delete the folder itself.
- Restart the PC, sign in with your password, and set up a new PIN in Settings.
- Restart once more and test the new PIN at the sign-in screen.
Delete only the contents of the NGC folder — never delete the folder, and never delete anything else under ServiceProfiles. If you are unsure about the ownership steps, ask a technically confident friend to sit with you, because taking ownership of the wrong folder can change permissions more widely than intended. After clearing, Windows treats the PIN as never set up, so the fresh setup writes clean data. When windows 11 pin sign-in unavailable survives this fix, the cause is a service, driver, or system-file fault, covered by Fixes 5 and 6.
Fix 5: Update Windows and the Device Drivers
An update can both cause and cure this fault: the update that broke the PIN rules is often followed by another update that repairs them. Driver updates matter too, because the TPM driver and the chipset drivers are what let Windows Hello talk to the security chip. Install everything pending, including optional driver updates.
- Open Settings, then Windows Update, and click Check for updates.
- Install every update offered, then restart the PC.
- Return to Windows Update and open Advanced options, then Optional updates.
- Install any driver updates listed there, especially chipset and security device drivers.
- Restart the PC again after the driver updates.
- Open Settings, then Accounts, then Sign-in options, and check the PIN status.
- Try setting up the PIN again if the option is now available.
Check the PC maker’s own support website for a TPM or chipset driver if Windows Update offers none — use only the maker’s site, never a driver-downloader tool, because shady driver updaters are a common source of malware. If face sign-in also stopped working, our guide to Windows Hello face recognition not working covers the camera side of Windows Hello. A PIN that returns after updates proves the fault was a version mismatch, and keeping updates current prevents it from coming back.
Fix 6: Run SFC and DISM to Repair System Files
When the sign-in screen is slow, shows errors, or loses the PIN option even after the stored data is cleared, damaged system files are the likely cause. System File Checker replaces damaged protected files, and DISM repairs the store those replacements come from. Run them in order from an administrator Command Prompt.
- Click Start, type
cmd, right-click Command Prompt, and choose Run as administrator. - Click Yes on the permission prompt.
- Type
sfc /scannowand press Enter, then wait for the scan to finish. - If the scan reports fixed problems, note that result.
- Next, type
DISM /Online /Cleanup-Image /RestoreHealthand press Enter. - Wait for the repair to finish — it can take fifteen minutes or more.
- Restart the PC and test the PIN at the sign-in screen.
Do not close the window while a scan is running. If System File Checker reports files it could not fix, run the DISM command and then repeat the scan — the second scan often succeeds once DISM has repaired its source files. These tools only touch Windows system files and never delete your documents or programs. A PIN that works after this repair proves the fault was file damage, and the repair also protects the rest of Windows from the same damage.
Fix 7: Reset the PIN From the Lock Screen
If you cannot sign in at all — the password fails too, or there is no password option — the lock screen itself offers a PIN reset. This uses your Microsoft account verification to prove who you are, then lets you set a new PIN without signing in first. It needs an internet connection.

- On the sign-in screen, click I forgot my PIN under the PIN box.
- If the link is missing, click Sign-in options and look again.
- Sign in to your Microsoft account when asked, using your password.
- Complete the verification step — a code sent to your email or phone.
- Choose a new PIN when prompted and confirm it.
- Wait for Windows to apply the new PIN, then sign in with it.
- Restart the PC and test the new PIN once more.
If the verification code never arrives, check the spam folder of your recovery email, and check that the phone number on the account is current. For a local account with no Microsoft account link, this reset is not offered — use Fix 9 or Fix 10 instead. Never pay for a “PIN reset tool” online: the official reset is free and is the only safe one. A lock-screen reset that succeeds proves the account is healthy and the old PIN data was the whole problem.
Fix 8: Check the Account Settings and Microsoft Account Sync
A broken link between your PC and your Microsoft account can block the PIN even when the PIN data is healthy. Windows checks the account from time to time, and a changed password, a security hold, or a sync failure can leave the local sign-in in a confused state. Reconnecting the account restores the link.
- Sign in with your password and open Settings, then Accounts.
- Click Your info and look for a warning about the account or verification.
- Click Verify or Fix beside any warning and follow the prompts.
- Open Settings, then Accounts, then Email & accounts.
- Confirm your Microsoft account is listed and shows no error.
- If the account shows an error, remove it and add it again with the current password.
- Restart the PC and test the PIN at the sign-in screen.
If you recently changed your Microsoft password on another device, the PC may still hold the old one — signing in with the new password once usually repairs the sync. Check that the PC’s date, time, and time zone are correct, because a wrong clock breaks account verification. Do not switch the account to a local account as a “fix” unless you mean to: switching changes how sync, OneDrive, and the Microsoft Store behave. A PIN that returns after the account check proves the link, not the PIN, was broken.
Fix 9: Boot Into Safe Mode and Repair the Sign-In Options
Safe Mode loads Windows with only the essential services and no third-party programs. If the PIN works in Safe Mode, a third-party program or driver is interfering. If it fails there too, the fault is in Windows itself. Either answer narrows the search, and Safe Mode also lets you remove the PIN cleanly when normal mode will not.
- Hold Shift while you click Restart from the sign-in screen power menu.
- On the blue recovery screen, choose Troubleshoot, then Advanced options.
- Choose Startup Settings, then Restart.
- Press 4 or F4 for Safe Mode when the options appear.
- Sign in with your password — the PIN may not be offered in Safe Mode.
- Open Settings, then Accounts, then Sign-in options, and remove the PIN.
- Restart normally, then set up a fresh PIN and test it.
Safe Mode looks plain — low resolution, black desktop, no fancy effects — and that is normal. Do not change drivers or uninstall programs from Safe Mode unless you already know which one is suspect, because Safe Mode hides too much to diagnose by trial and error. If you cannot reach Safe Mode at all, our guide to Windows 11 Safe Mode not loading covers the startup side. A PIN removed cleanly in Safe Mode and rebuilt in normal mode often ends the fault for good.
Fix 10: Create a New Local Administrator Account
A damaged user profile can block the PIN for one account while a fresh account works perfectly. A new administrator account tests this in minutes. If the PIN works there, the fault lives in the old profile, and moving your files across is safer than fighting the damaged profile further.

- Sign in with your password and open Settings, then Accounts, then Other users.
- Click Add account, then I don’t have this person’s sign-in information.
- Choose Add a user without a Microsoft account and create a local account.
- Set the new account’s type to Administrator.
- Sign out and sign in to the new account with its password.
- Set up a PIN in Settings, then Accounts, then Sign-in options.
- Restart and test the new account’s PIN at the sign-in screen.
If the new account’s PIN works, copy your documents, pictures, and desktop files from the old account’s folders using File Explorer, and check everything opens before you remove anything. Do not delete the old account until the new one has worked for a full day. If the PIN fails in the new account too, the fault is system-wide, and the reset in Fix 11 is the right ending. This test is worth the effort because it separates a profile fault from a Windows fault with certainty.
Fix 11: Reset Windows While Keeping Your Files
A reset is the last resort, for a PIN fault that survives cleared data, repaired files, and a new account. Keep my files reinstalls Windows and removes your programs and settings, but leaves your personal files in place. It fixes any software cause, because it returns the sign-in system to a fresh state.
- Back up your important files to an external drive, even though the reset keeps files.
- Open Settings, then System, then Recovery.
- Click Reset PC under Recovery options.
- Choose Keep my files.
- Choose Cloud download if your internet is fast, or Local reinstall if it is not.
- Confirm the choices and let the reset run — the PC will restart several times.
- After setup, set up a fresh PIN and test it at the sign-in screen.
Make a list of your installed programs before you reset, because you will reinstall them afterwards. Sign in with your Microsoft account during setup so your settings sync back. If the PIN still fails after a reset, the cause is likely the TPM hardware or the drive, and a repair shop should test both before you spend more time on software fixes. A System Restore point taken before major changes is good insurance, and our guide to Windows 11 System Restore not working helps if restore itself fails. A reset that ends with a working PIN is the proof that the software fault is gone.
What to Avoid
- Do not use a “password recovery” or “PIN reset” tool from an unknown website — many carry malware and can damage the account.
- Do not delete the NGC folder itself — clear only its contents, as Fix 4 describes.
- Do not use pirated software, activators, or cracks — they can damage sign-in services and invite malware.
- Do not turn off the TPM in firmware settings unless a support agent asks you to — the PIN depends on it.
- Do not force the PC off with the power button during sign-in repairs — a forced shutdown can damage the stored PIN data.
- Do not delete your user account before copying your files — test a new account first and move files across.
- Do not install a driver-downloader tool — get drivers only from Windows Update or the PC maker’s website.
Frequently Asked Questions
Why did the PIN stop working after a Windows update?
Updates sometimes change the sign-in rules or reset the setting that requires Windows Hello sign-in, so the old stored PIN data no longer matches. Removing the PIN and adding a fresh one usually fixes it, because the fresh setup writes data that matches the new rules. Fixes 3 and 4 cover the removal, and Fix 5 installs any follow-up update that repairs the change.
Can I sign in without the PIN while I fix it?
Yes. The password opens the same account, and the sign-in screen offers it under Sign-in options. For a Microsoft account, the password is the one you use on Microsoft’s websites. If you forgot the password too, the lock-screen reset in Fix 7 verifies you through email or phone and lets you set a new PIN.
Is clearing the NGC folder safe?
Yes, when done as Fix 4 describes. The folder holds only sign-in data, and Windows rebuilds it when you set up a new PIN. Delete only the contents of the folder, never the folder itself, and never anything else under ServiceProfiles. If you are unsure about the ownership steps, ask someone technically confident to help.
Why is the Remove button greyed out for my PIN?
The setting that requires Windows Hello sign-in for Microsoft accounts can block PIN removal. Turn off that setting on the Sign-in options page, then try Remove again. If it stays greyed out, the stored data is too damaged for Settings to clear, and Fix 4 removes it directly from the NGC folder.
Does a new user account really fix a PIN fault?
It fixes the fault when the cause is a damaged user profile, because the new account gets fresh sign-in data and fresh settings. It also proves where the fault lives: if the PIN works in the new account, the old profile is damaged; if it fails there too, the fault is system-wide. Fix 10 walks through the test and the file move.
Should I reset Windows if nothing else works?
A reset is the last resort, after the stored data is cleared, the files are repaired, and a new account is tested. Choose Keep my files, back up first anyway, and use the official reset in Settings. If the PIN still fails after a reset, the cause is likely hardware — the TPM chip or the drive — and a repair shop should test it.
Conclusion
When windows 11 pin sign-in unavailable takes away your quick sign-in, the fix is almost always a restart, a password sign-in followed by a fresh PIN, or clearing the damaged stored data — not a new account and not a paid tool. Sign in with your password first, then remove and rebuild the PIN, then work through updates, file repair, and the account checks in order. Finish by restarting and signing in with the new PIN twice, because a PIN that works on two consecutive startups is the only proof that counts. Keep your password written down somewhere safe, keep updates installing, and the PIN should stay available.

[…] the sign-in problem is paired with a missing PIN option, our guide to Windows 11 PIN sign-in unavailable covers the sign-in […]