
You type your password, press Enter, and Windows answers with an error instead of your desktop. When windows 11 user profile service failed sign-in appears, the message usually reads “The User Profile Service failed the sign-in” and adds that the user profile cannot be loaded. The screen then sends you straight back to sign-in, and every retry ends the same way. It feels as if your account has been wiped, but in most cases your documents, photos, and settings are still on the drive. Windows simply cannot open the profile that holds them.
This guide works through the causes in order, from a simple restart to a full repair install. Nothing here deletes your files, and the deeper fixes include a backup step first. Work through the fixes one at a time, and test a normal sign-in after each one. If you have a second administrator account on the PC, several fixes become much easier, so check for one before you begin.
Table of Contents
- Why This Error Happens
- Quick Checks
- Diagnosing the Problem
- Fix 1: Restart the PC and Try Signing In Again
- Fix 2: Sign In With Another Account or a Different Sign-In Option
- Fix 3: Boot Into Safe Mode and Sign In There
- Fix 4: Start the User Profile Service From the Services List
- Fix 5: Run SFC and DISM to Repair Damaged System Files
- Fix 6: Check for Windows Updates and Scan the Drive for Errors
- Fix 7: Repair the Profile Entry in the Registry
- Fix 8: Restore the System to an Earlier Point
- Fix 9: Create a New Administrator Account and Move Your Files
- Fix 10: Run an In-Place Upgrade Repair Install
- Fix 11: Reset Windows While Keeping Your Files
- What to Avoid
- Frequently Asked Questions
- Conclusion
- Helpful Official Resources
Why This Error Happens
Your user profile is a folder of settings, desktop files, and registry data that Windows loads every time you sign in. The User Profile Service is the background service that does the loading: it reads the profile folder, applies your settings, and hands you the desktop. If that service cannot start, or cannot read the profile data, Windows refuses the sign-in rather than loading a broken desktop. These are the reasons that happens most often.
1. The User Profile Service Failed to Start
Windows runs dozens of background services at startup, and the profile service is one of them. If it fails to start because of a timing clash, a stopped dependency, or a change made by another program, there is nothing to load your profile when you sign in. The sign-in screen then shows the error and returns you to the start. A restart or a manual service start fixes this cause, because the profile data itself is undamaged.
2. The Profile Registry Entry Is Damaged or Duplicated
Windows keeps a record of every profile in the registry, under a list that maps each account to its profile folder. If that record is damaged, points at the wrong folder, or has a duplicate entry marked as a backup, Windows cannot decide which profile to load. This is the classic cause of windows 11 user profile service failed sign-in after a forced shutdown or a failed update, and it is also the cause that the registry repair in Fix 7 is designed to correct.
3. A Forced Shutdown Corrupted the Profile Data
If the PC loses power or is forced off while Windows is writing profile data, the stored settings can be left half-written. The next sign-in then finds a profile that fails its own checks, and Windows refuses to load it. Laptops with failing batteries and PCs on unreliable power see this cause most often. The files inside the profile folder are usually untouched — only the settings data that describes the profile is broken.
4. Damaged System Files Are Blocking the Sign-In
The profile service depends on shared Windows files, and if those files are damaged by a disk error, a bad update, or a sudden shutdown, the service cannot run properly. File damage also explains why the error can appear suddenly on a PC that worked fine the day before. The System File Checker and DISM tools exist exactly for this repair, and Fix 5 runs them both in the right order.
5. A Windows Update Left the Profile in a Broken State
Feature updates and large cumulative updates rewrite parts of Windows, including the files and settings the profile service uses. If an update is interrupted, or if it finishes with an error, the profile service can be left in a state where it starts but cannot read profiles. When windows 11 user profile service failed sign-in begins the morning after an update, the update is the prime suspect, and the update check in Fix 6 or the restore point in Fix 8 usually resolves it.
6. The Drive Has Errors or the Profile Folder Permissions Changed
The profile folder lives on your system drive, and if the drive develops bad sectors or file-system errors, Windows may be unable to read the profile data. Separately, if the folder permissions were changed by another program, a migration tool, or a manual edit, the profile service may be denied access to its own data. Both cases produce the same sign-in error, and both need the drive check in Fix 6 before any registry work, because editing the registry cannot fix a drive that cannot be read.
Quick Checks
Two minutes before the deep fixes.
- Restart the PC fully with Restart, not Shut down, and try signing in again.
- Check whether another account on the PC can sign in normally.
- Check whether the error started right after an update, a power cut, or a forced shutdown.
- Check whether the PC has a second administrator account you can use for repairs.
- Check whether the drive is nearly full — a full system drive can block profile loading.
- Think about what changed — did windows 11 user profile service failed sign-in begin after new software, a cleanup tool, or a disk change?
Diagnosing the Problem
| Symptom | Cause | Go to Fix |
|---|---|---|
| Error on first sign-in after a restart | Profile service failed to start | Fix 4 |
| Error began right after a Windows update | Update left the profile broken | Fix 6 |
| Error after a power cut or forced shutdown | Corrupted profile data | Fix 7 |
| Error on one account, another account works | Damaged profile for that account | Fix 9 |
| Error on every account on the PC | Damaged system files or service | Fix 5 |
| Error with slow disk or strange noises | Drive errors blocking profile reads | Fix 6 |
| Error returns after every temporary fix | Damaged registry entry for the profile | Fix 7 |
| Error survives all service and file repairs | Deep Windows damage needing repair install | Fix 10 |
Fix 1: Restart the PC and Try Signing In Again
A full restart is the simplest fix, and it works more often than people expect. Restarting clears stuck services, releases locked profile files, and gives the profile service a clean start. Use Restart rather than Shut down, because shutdown on many PCs uses fast startup, which keeps part of the system session loaded. A restart loads everything fresh.

- On the sign-in screen, click the power icon at the bottom right.
- Hold Shift, click Restart, then release Shift when the PC begins restarting — or choose plain Restart for a normal restart.
- Wait for the PC to reach the sign-in screen again.
- Type your password or PIN slowly and press Enter.
- If the error returns, restart once more and try again.
- If the second restart also fails, move on to Fix 2 without repeating restarts.
- Note whether the error message is identical each time, for the later diagnosis.
- Two restarts are enough to test this fix.
- Repeating restarts beyond that wastes time and does not change the result, because a profile record that is damaged stays damaged.
- If the error text changes between attempts, or if the PC shows a different screen, note the change — it tells you whether the fault is a stuck service or damaged data.
- When windows 11 user profile service failed sign-in survives two clean restarts, the cause is stored damage rather than a one-off startup clash, and the fixes below address that damage directly.
Fix 2: Sign In With Another Account or a Different Sign-In Option
If another account can sign in, the fault is limited to your profile, and that account gives you a working desktop from which to run repairs. If no account can sign in, the fault is system-wide, and the service and file repairs matter more. Either way, this test divides the problem in half and tells you which fixes to prioritise.
- On the sign-in screen, look at the bottom left for other user accounts.
- Click another account, if one is listed, and sign in with its password.
- If the other account reaches the desktop, the fault is in your profile only.
- If no other account is listed, click Sign-in options under the password box.
- Try the password option if you normally use a PIN, or the PIN if you normally use a password.
- If a different sign-in option works, sign in and move to Fix 4 from the desktop.
- If every account and option fails, move on to Fix 3 and Safe Mode.
- A working second account is the safest repair platform: you can run the service checks, the file repairs, and the registry fix from a normal desktop instead of from recovery screens.
- If the second account loads a temporary desktop with a warning that files will not be saved, that is a different fault — our guide to Windows 11 temporary profile login covers that problem.
- Do not create a new account yet if you can avoid it; Fix 9 covers that step properly, with your files moved across safely.
Fix 3: Boot Into Safe Mode and Sign In There
Safe Mode starts Windows with only the essential services and drivers, which removes third-party programs from the sign-in path. If you can sign in under Safe Mode, a third-party program or driver is interfering with the profile service. If Safe Mode fails the same way, the fault is in Windows itself or in the profile record.
- On the sign-in screen, hold Shift and click the power icon, then Restart.
- On the blue recovery screen, choose Troubleshoot, then Advanced options.
- Choose Startup Settings, then click Restart.
- When the numbered list appears, press 4 for Safe Mode.
- Try signing in with your usual account at the Safe Mode sign-in screen.
- If sign-in works, restart normally and test again — a clean Safe Mode sign-in sometimes clears the blockage.
- If sign-in works in Safe Mode but fails normally, move to Fix 4 and check for interfering startup programs.
- Safe Mode looks plain — a black desktop, large text, and the words Safe Mode in the corners — and that is normal.
- Do not change settings at random while you are in Safe Mode; use it as a test first, and as a repair platform second.
- If the recovery screen will not appear, or Safe Mode itself will not load, our guide to Windows 11 Safe Mode not loading covers the deeper startup repairs.
- A Safe Mode sign-in that succeeds proves your profile data is readable, which is good news for every fix that follows.
Fix 4: Start the User Profile Service From the Services List
The profile service should start automatically with Windows. If its startup type was changed, or if it stopped and never restarted, starting it by hand and restoring its automatic setting fixes the error at the source. You need a working desktop for this fix — use the second account from Fix 2, Safe Mode from Fix 3, or the built-in administrator account in recovery.
- Press Windows key + R, type
services.msc, and press Enter. - In the list, find User Profile Service and read its Status and Startup Type columns.
- If the status is blank, right-click the service and choose Start.
- If the service is running, right-click it and choose Restart instead.
- Right-click the service again, choose Properties, and set Startup type to Automatic.
- Click Apply, then OK, and close the Services window.
- Restart the PC and try signing in with your usual account.
- If the Start option is greyed out, the service may be disabled by policy or blocked by a damaged dependency — note that and move to Fix 5, because file damage is the likely cause.
- Do not change other services while you are in this list; the Services window controls the whole system, and changing entries you do not understand can make the PC worse.
- If the sign-in problem is paired with a missing PIN option, our guide to Windows 11 PIN sign-in unavailable covers the sign-in side.
- When windows 11 user profile service failed sign-in is caused by a stopped service, this fix ends it in minutes, with no file changes at all.
Fix 5: Run SFC and DISM to Repair Damaged System Files
System File Checker scans protected Windows files and replaces damaged ones with correct copies, and DISM repairs the component store that SFC draws from. Run DISM first, then SFC, because SFC can only repair what the component store holds. Run both from an administrator Command Prompt, from a working desktop or from Safe Mode with Command Prompt.
- Right-click the Start button and choose Terminal (Admin) or Command Prompt (Admin).
- Click Yes on the permission prompt to allow administrator access.
- Type
DISM /Online /Cleanup-Image /RestoreHealthand press Enter. - Wait for DISM to finish — it can take fifteen minutes or more, and the progress bar may pause.
- When DISM reports success, type
sfc /scannowand press Enter. - Wait for the scan to reach 100% and read the result message.
- Restart the PC and try signing in with your usual account.
- Do not close the window while either tool is running, and do not restart mid-scan — an interrupted repair can leave files in a worse state than it found them.
- If SFC reports that it found corrupt files and repaired them, the repair may be exactly what the profile service needed.
- If SFC reports damage it could not repair, run the DISM command once more and then repeat SFC; the second pass often succeeds.
- File repair is safe for your documents — it touches only Windows system files — and it is the right fix whenever the error affects every account on the PC.
Fix 6: Check for Windows Updates and Scan the Drive for Errors
An interrupted update can leave the profile service broken, and a drive with file-system errors can stop Windows reading the profile data. This fix covers both: finish any pending updates, then scan the drive. Run the update check from a working account or Safe Mode, and run the drive scan from an administrator Command Prompt.
- Open Settings, then Windows Update, and click Check for updates.
- Install any updates offered, then restart the PC when asked.
- Try signing in with your usual account after the update restart.
- If the error remains, open an administrator Command Prompt as in Fix 5.
- Type
chkdsk C: /fand press Enter, then type Y when asked to schedule the scan. - Restart the PC and let the disk scan run to completion without interrupting it.
- When Windows reaches the sign-in screen, try your usual account again.
- The disk scan can take a long time on a large drive, and the percentage may appear stuck — leave it alone and let it finish.
- If the scan reports bad sectors or unrecoverable errors, back up your files before anything else, because the drive itself may be failing.
- Pending updates that refuse to install are a separate fault with their own fixes, and they should not block you here: the disk scan is the important half of this fix.
- An update that completes cleanly after a failed attempt often restores the profile service on its own, because the update rewrites the very files the service depends on.
Fix 7: Repair the Profile Entry in the Registry
The registry holds one entry per profile, and a damaged or duplicated entry is the most common deep cause of this error. The repair is to back up the registry, find the entry for your account, remove the duplicate backup marker, and reset two values that tell Windows the profile is ready. Work slowly, change only the entry described here, and stop if anything looks different from the steps below.

- Sign in with another administrator account, or boot into Safe Mode, to get a desktop.
- Press Windows key + R, type
regedit, and press Enter, then click Yes. - Click File, then Export, and save a full registry backup to your desktop.
- Navigate to
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList. - Click each long entry in turn and read its ProfileImagePath value to find your account.
- If your account has two entries, one ending in
.bak, rename the entry WITHOUT.bakby adding.old, then remove.bakfrom the other entry. - In the correct entry, set RefCount to
0and State to0, then restart and sign in.
- The
.bakentry is the backup copy Windows made of your profile record, and it is usually the healthy one — that is why the rename order matters. - If there is only one entry for your account and it has no
.baktwin, skip the rename and just set RefCount and State to0. - If the ProfileImagePath points at a folder that does not exist, do not guess a new path — move to Fix 9 instead, because the profile folder itself is gone.
- When windows 11 user profile service failed sign-in is caused by a duplicated registry entry, this fix restores the original profile with its settings and desktop intact, which no other fix can do.
Fix 8: Restore the System to an Earlier Point
System Restore rolls Windows system files and settings back to a restore point taken when the PC was working, without touching your documents. It is the right fix when the error began after an update, a driver install, or a settings change, and when the service and file repairs have not helped. You need a restore point from before the error began.
- From a working desktop, press Windows key + R, type
rstrui, and press Enter. - Click Next, then tick Show more restore points to see the full list.
- Choose a restore point dated before the sign-in error began.
- Click Next, review the affected programs list, then click Finish.
- Confirm the restore and wait — the PC will restart and the restore can take twenty minutes or more.
- Try signing in with your usual account when the PC returns to the sign-in screen.
- If no restore point exists, or the restore fails, move on to Fix 9.
- System Restore does not delete your documents, photos, or downloads, but it does remove programs and drivers installed after the chosen point, so you may need to reinstall one or two programs.
- Do not interrupt the restore once it starts — a half-finished restore can leave Windows unbootable.
- If the restore tool itself refuses to run or reports an error, our guide to Windows 11 System Restore not working covers the restore-side repairs.
- A restore that succeeds proves the fault was a system change rather than damaged profile data, and it often ends the error in one step.
Fix 9: Create a New Administrator Account and Move Your Files
If the old profile cannot be repaired, a new account gives you a clean profile, and moving your files across gives you back your documents. This fix never deletes the old profile folder, so nothing is lost while you copy. It is the safe ending when the registry repair fails or the profile folder itself is damaged.
- Sign in with another administrator account, or use Safe Mode, to reach a desktop.
- Open Settings, then Accounts, then Other users, and click Add account.
- Choose I don’t have this person’s sign-in information, then Add a user without a Microsoft account.
- Give the new account a name and password, then change its account type to Administrator.
- Sign out and sign in with the new account, so Windows builds its profile folder.
- Open File Explorer, open
C:\Users, and copy your documents, pictures, and desktop files from the old profile folder to the matching folders in the new one. - Do NOT copy the whole old profile folder or its hidden files — copy only your own folders and files.
- Copy in small groups and check each group opens in the new account before moving on.
- Browser bookmarks and passwords usually come back through browser sync once you sign in to the browser, so check sync before hunting for bookmark files by hand.
- Keep the old profile folder untouched for at least a week, in case you remember a file you missed.
- When windows 11 user profile service failed sign-in has damaged the profile beyond registry repair, a new account is not a defeat — it is a clean profile with all of your files, and it ends the error for good.
Fix 10: Run an In-Place Upgrade Repair Install
An in-place upgrade reinstalls Windows over itself, keeping your files, programs, and settings, while replacing every system file with a fresh copy. It fixes deep Windows damage that SFC and DISM cannot reach, including a profile service that is broken at the system level. You need the Windows 11 installation media from Microsoft and about an hour of uninterrupted time.

- Back up your documents to an external drive before you begin, as a precaution.
- Download the Windows 11 installation media from Microsoft’s official website on a working PC if needed.
- Mount the installation file or insert the installation USB drive.
- Run
setup.exefrom the installation media and click Change how Setup downloads updates, choosing Not right now for speed. - Accept the licence terms and, on the ready screen, confirm it says Keep personal files and apps.
- Click Install and wait — the PC will restart several times and the process can take over an hour.
- When setup finishes, sign in with your usual account and check that your files and programs are intact.
- If the ready screen does NOT offer to keep your files and apps, stop — the installation media does not match your installed edition, and continuing would wipe your programs.
- The repair install keeps your files by design, but the backup in step 1 is still worth doing, because no major Windows operation should run without one.
- Do not force the PC off during setup, even if the progress percentage seems stuck.
- A repair install that completes gives you a fresh copy of Windows with your world intact, and it resolves sign-in faults that survive every targeted repair.
Fix 11: Reset Windows While Keeping Your Files
Resetting Windows is the last resort, for an error that survives the service fix, the file repairs, the registry repair, and the in-place upgrade. The Keep my files option reinstalls Windows and removes your programs, while keeping your personal files. You will need to reinstall programs afterwards, so treat this as the final step, not a shortcut.

- Back up your documents to an external drive, even though the reset offers to keep them.
- Make a list of the programs you use, so you can reinstall them afterwards.
- Open Settings, then System, then Recovery, and click Reset PC.
- Choose Keep my files on the first screen.
- Choose Cloud download if your internet is fast, or Local reinstall if it is not.
- Review the summary screen, confirm it says your files will be kept, then click Reset.
- Wait for the reset to finish, sign in, and check your files before reinstalling programs.
- If you cannot reach Settings at all, start the reset from the recovery screen: hold Shift while clicking Restart on the sign-in screen, then choose Troubleshoot and Reset this PC.
- The cloud download fetches a fresh copy of Windows from Microsoft and needs a stable connection; the local reinstall uses the files already on your PC and is faster offline.
- After the reset, sign in with your usual account, confirm your documents are present, and only then reinstall programs one at a time.
- A reset ends the sign-in error by giving you a clean Windows install, and with your files backed up first, it costs you an afternoon of reinstalls rather than anything irreplaceable.
What to Avoid
- Do not delete the old profile folder to “start fresh” — your documents live inside it, and deletion is permanent.
- Do not edit registry entries other than the profile entry described in Fix 7 — one wrong change can stop Windows starting.
- Do not use pirated software, activators, or cracks — they can damage system files and invite malware that breaks sign-in.
- Do not run registry cleaners or “profile fixer” tools from unknown makers — they often damage the profile record further.
- Do not force the PC off during a restore, a disk scan, or a repair install — an interrupted repair can leave Windows unbootable.
- Do not copy the whole old profile folder into a new account — hidden settings files carry the damage across with them.
- Do not skip the backup before the deeper fixes — the backup takes minutes and removes the risk from every repair.
Frequently Asked Questions
What is the most common cause of windows 11 user profile service failed sign-in?
A damaged or duplicated profile entry in the registry is the most common deep cause, usually after a forced shutdown or an interrupted update. The profile folder and files are normally fine — Windows simply cannot read the record that points to them. Fix 7 repairs that record, and Fix 4 covers the simpler case where the service itself failed to start.
Are my files lost when this error appears?
Almost always, no. The error means Windows cannot load your profile settings, not that your files are gone. Your documents, photos, and desktop files usually sit untouched in the profile folder on the drive. You can reach them from another administrator account, from Safe Mode, or by moving them to a new account as Fix 9 describes. Back them up before the deeper repairs, as a precaution.
Why does the error affect only one account on the PC?
Because each account has its own profile folder and its own registry entry. Damage to one entry blocks only that account, while other accounts sign in normally. That pattern is good news: it proves Windows itself is healthy, and it points at the registry repair in Fix 7 or the new-account fix in Fix 9. When windows 11 user profile service failed sign-in affects every account, the cause is system-wide instead, and Fixes 4 and 5 matter more.
Is it safe to edit the registry to fix a profile?
It is safe if you follow Fix 7 exactly: back up the registry first, change only the entry for your account, and set only the two values named. The registry controls all of Windows, so random edits are dangerous — but the profile-entry repair is a narrow, well-understood change. If anything in the registry looks different from the steps, stop and use Fix 9 instead, which needs no registry work at all.
Can a Windows update really cause this error?
Yes. Large updates rewrite the files and settings the profile service uses, and an interrupted or faulty update can leave the service unable to read profiles. The pattern to watch for is the error appearing on the first sign-in after an update. When windows 11 user profile service failed sign-in follows an update, check for further updates in Fix 6, or roll back with a restore point in Fix 8.
Will resetting Windows delete my personal files?
Not if you choose Keep my files in Fix 11. That option reinstalls Windows and removes your installed programs, but keeps your documents, photos, and other personal files. The Remove everything option does delete files, so read the choice screen carefully. Back up your files to an external drive before the reset anyway — a backup removes the last shred of risk.
Conclusion
When windows 11 user profile service failed sign-in blocks your desktop, start with restarts and the service check, then repair the system files, then fix the profile record or move to a new account. Your files are almost always safe throughout, because the fault is in the loading mechanism, not in the data. Finish by signing in and out twice with your usual account, because two clean sign-ins in a row are the proof that the profile loads reliably. Keep a second administrator account on the PC from now on — it turns the next sign-in problem from a lockout into a five-minute repair.
